Joined in 2023 
82 
63 About this deal
The Cooler Master MasterFrame 700 only has 100×100 VESA mount holes, which potentially limits the sort of rig you can build in the case. 100×100 is relatively limited in maximum weight, and Cooler Master itself recommends only wall-mounting builds less than 30.8 pounds. Usually, there are two cases present, the mid-tower case and the full tower. Both of these cases can fit the standard ATX motherboard. This ATX motherboard size is the most common one present. Even though the exact sizing of the cases varies, most mid towers are up to 18 inches high and 8 inches wide. What Makes a Great Wall Mounted PC Case? Recent buyers have all reported that this is a one-of-a-kind PC case that is fantastically built. It is incredibly spacious and has a high water cooling loop. They also noted that the assembly was no big deal, and the instruction manual was very easy. You can run the Core P8 like Thermaltake’s other Core cases, with only the main side tempered glass panel in place. In that configuration, it’s mostly just a much larger version of the Core P3. However, installing the front and top panels (and fan mounts) allows you to install 480 and 360 mm radiators in the front and top, which is handy if you’re planning a multi-rad custom loop. The Thermaltake Core P1 is an odd case: on the one hand, it does everything its bigger brothers do at a lower price and in a smaller form factor. So it’s a solid, great-looking platform for a wall-mounted build. But since a wall-mounted rig won’t take up room on your desk, it doesn’t offer quite the same sort of space-saving goodness as a great Mini-ITX case.
Best Wall Mounted PC Cases of 2023 – Complete Review Best Wall Mounted PC Cases of 2023 – Complete Review
The Cooler Master MasterFrame 700 is a wall-mountable open-air case with a unique “dual-wing” design, all behind an oversized tempered glass panel. The wing layout gives it excellent component compatibility, and it’ll fit almost any hardware you throw at it. The most critical part of running a wall-mounted rig is ensuring you have the correct mounting hardware. While all of our cases will attach to any VESA mounts, most monitor VESA mounts aren’t designed to handle loads as heavy as a whole gaming rig. Most buyers have been quite satisfied with this unit. They have said that the overall design and feel of the case are very much what they were expecting. Some, however, had quite some difficulty assembling the overall case together. Once they got that out of the way, they loved it! Looking for a traditional TV Stand? You want the the Invision Technology RS400 Television Stand - perfect for Televisions of 32 inches to 55 inches, offering VESA compatibility of 100x100 through to 400x400 and bearing loads up to 40KG - the Invision Technology RS400 TV Stand is the ideal choice for a Static TV Mount.Flip the MasterFrame 700 onto its two support rails, and you get a high-end test bench complete with adjustable wings for fan or radiator mounting. It’s not likely something that most users will take advantage of, but it’s an interesting option to have nonetheless. As with Thermaltake’s other wall-mount cases, the Core P8 has 75×75, 100×100, and 200×200 VESA mounts. The latter are especially critical on the Core P8 due to its size and weight, and you’ll want to use the 200×200 mounts with a strong TV mount designed to take heavy loads. It is a well-built stainless steel unit with a 6U cabinet with vented sides to keep your equipment cool. It has fully adjustable rails and comes with built-in square holes for easy mounting of equipment. It is also one of the few cases with removable top and bottom panels for a streamlined and stylish appearance, which makes it stand out. We’ve covered the case buying basics before, so we won’t repeat them here. Instead, let’s discuss a couple of wall mount-specific topics that will come in handy if you go down this route. Mounting Hardware This is a very smart consideration to remember. If your PC case is super expensive, then you will be worried about keeping it protected all the time. For this reason, finding a reasonable price PC case is a much smarter idea for you. Conclusion
Wall Mounts | RackSolutions
The Thermaltake Core P1 takes the essential features of the Core P3 and shrinks it down into a cute Mini-ITX size. You get the expected compromises in cooling and hardware support, but the Core P1 still has enough room for everything but the most high-end setups. Thermaltake’s Core P8 is a wall-mountable case for extreme setups, with room for multiple radiators and large motherboards It’s also unique among the other cases on our list for being a convertible case that you can use as an open-air or closed case, the latter of which opens up all of the Core P8’s cooling options. Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro. This is a great gaming PC case built and designed for optimal performance. It has an amazing design, and the cooling system gives the computer an ample amount of cooling. It is best for tech-savvy users who like making their systems into a work of art. It provides users unlimited flexibility when it comes to building the most customized PC. It is an excellent case due to which it comes close to the best product. Its affordability makes it a perfect buy for anyone with a computer looking to make it look amazing. It is not that good with cooling as compared to other cases, making it unsuitable for heavier computer users. However, the average computer user should definitely get this heavy and sturdy case due to its many other great features.There are many features that can make a wall-mounted PC case stand out. However, the most common reasons for these cases to be great are mentioned below. Compatibility Most of your components attach to the central motherboard tray, which has room for two ATX PSUs and supports a wide range of motherboard form factors from the large (SSI EEB) to the small (Mini-ITX). If you want to wall-mount a dual-CPU workstation, this is one of the few cases that’ll let you do it. All other products will be delivered via the fastest available method (excluding bank holidays and weekends) and generally within 3-5 days, depending on customer location. The Core P1 supports VESA 75×75, 100×100, and 200×200 for wall mounting. You should be able to use one of the smaller mounts here; the P1 is relatively lightweight, and 30.8 pounds should be more than enough for a Mini-ITX build. This is a great computer case for offices and hi-tech computer users. It is cost-effective, and its affordability with its amazing functions makes it a great case for your system. Its cooling vents even make it a good case for gamers out there that spend hours using their computers.
Great Deal 
New Comment