Electronic TRV Thermostat Valve Head (28mm to 30mm Adapter)

Product Information

Is this the correct adaptor to fit a Drayton Wiser smart TRV head to a Regis valve body? I bought the Regis from B&Q: I have a comap TRV with no thermostatic head ... all the ones I have from old radiators don’t seem to fit. Can you suggest a solution rather than drain down?? For Siri Shortcuts to work correctly, it is important that you have first made a successful connection between the EasyControl thermostat and the EasyControl app.

Radiator Adapter for TRV 28mm to 30mm - Low Energy Supermarket Radiator Adapter for TRV 28mm to 30mm - Low Energy Supermarket

No, this is not possible. The display turns on automatically if something or someone is within a 1 meter radius of the thermostat, and it switches off after 5 minutes if no movement has been detected.

🍪 Privacy & Transparency

While calibrating, your heating needs to be on. If you install your Hive Radiator Valve over the summer and your heating is off, it will start calibrating when you switch your heating on again. However, if you want to speed up the process, there's a special calibration cycle available in the app that can do this for you. You can remove the cover from your Hive Radiator Valve to change the batteries. Remember to keep the batteries away from children as they can be a health hazard. You will need the adapter if you want to use the Bosch EasyControl with the below heating appliances:

Pegler TRV Adaptor - Heating Controls Online

Bosch only stores the personal information needed to register your product for warranty, warranty and maintenance work, and servicing purposes. Open port 5222 and 5223. If you have a smartphone that connects to the same Wi-Fi network and you can send WhatsApp messages, these ports will be open and cannot be the cause of the problem.I have Concerto TRVs which have a 28mm 1.0mm pitch thread onto the valve. Will this adaptor work to get to a Hive head? If you prefer to put the EasyControl in the most suitable location in your house, this is possible by considering our Wireless solution. You will be able to pair the Bosch EasyControl with the EasyControl RF Key and use it in combination with our table stand.