Iwata-Medea Eclipse HP CS Dual Action Airbrush Gun / Gravity Feed

Product Information

To reveal the nozzle (4), unscrew the needle cap (1) and nozzle cap (2) by hand. For the Iwata Eclipse airbrushes, remove the nozzle head cap (3) with the nozzle head cap wrench (included with the airbrush). Iwata’s branding is bright and clear, and whilst the information on the front of the box may not tell you too much, the colour alone is saying a lot more than meets the eye. You may also clean your airbrush using a painted flush between different colors if you're utilizing a gravity-feed airbrush. Remove the cup lid and use either cleaning or water to spray through the airbrush until it's clean, as shown above. Safety Tips

Iwata 5 Ways to Spray - airbrushes Iwata 5 Ways to Spray - airbrushes

The Eclipse allows for simple maintenance ensuring you will always have something ready to use, time and time again. Even if it does start to wear, you can always get support from companies like Airbrushes.com should you need a repair or more thorough maintenance. Iwata Eclipse HP-CS – Final ThoughtsTo answer this question, it really depends on your current set-up. If you have no airbrush at all and you’re looking for something that works well and will last. This thing is perfect, offering great results out of the box. However, there are certain disadvantages to utilizing this airbrush. This product's significant advantages and disadvantages have been outlined so that you can make an informed selection. Pros The airbrush itself is relatively simple with the only additional components in the box being a wrench to loosen the nose and a bottle of Iwata lube to maintain protect the mechanism.

Iwata Airbrushing Equipment | Iwata Airbrushes and airbrush Iwata Airbrushing Equipment | Iwata Airbrushes and airbrush

The best airbrush company in the UK, featuring top brands, courses, paints, accessories and servicing. I made my own attempts at replicating this using dedicated miniature paints. the image below is using a pre-thinned airbrush paint Nocturne Green – Air. Unlike the other Iwatas, it has a different type of nozzle ‘floating nozzle’ which is easier and less delicate to take apart. The tiny fragile nozzle on the Eclipses are in the larger gold coloured bit. AS you can see, Similar results, but I did have some extra challenges as the flow was not consistent due to some heavier parts of the mix. You can see above (directly to the right of the Iwata QA sheet example) I was able to spray some comparable lines.Have a great airbrush experience every time you spray by cleaning your airbrush regularly and before paint dries. Category 5: Full Finish. When airbrush projects call for larger coverage, Iwata G-Series Airbrush-Guns and Anest Iwata Spray Guns offer a full range of models. G-Series sprays with the fine atomisation and air pressure of an airbrush. For maximum coverage and full finishes, Anest Iwata spray guns offer superior atomisation for a reliable and consistent finish.

Iwata Eclipse HP-CS Gravity Feed Dual Action Airbrush

Use caution when removing and reinserting your airbrush nozzle. We recommend using our Nozzle Wrench (available as part of the Iwata Airbrush Cleaning Kit and the Iwata Professional Maintenance Tools or sold separately as part CLNW1). If you are using the small spanner that was included with your airbrush or another tool, take extra care not to over-tighten as this can cause this delicate part to break. The needle is delicate, so do not allow it to get damaged or bent. Always clean the hand properly after each use. To clean it, you'll need to take it out of the airbrush and clean it thoroughly. Needle are made from hardened stainless steel that will last ages but their fine tip can be subject to physical damage. Make sure to straighten a bent needle before putting it through the nozzle or you will damage the nozzle. Nozzle are fragile part that can be expensive to replace. Experienced airbrush users who demand absolute precision choose Iwata Custom Micron Series airbrushes for extreme detail spraying. What makes Custom Micron special is that every Custom Micron Head System is custom matched and hand-tuned to meet Iwata's rigorous performance standards for superior atomization.

Iwata has also tried to simplify the nozzle naming convention too, The Iwata Eclipse comes as standard with an E3 nozzle/needle. The needle and Nozzle are separate parts but you need to use the correct ones together. If you are considering changing to the optional E5, you will need to get a new Nozzle Cap too. Delivered in foam lined presentation case with instructions, head spanner & 2ml Iwata Superlube airbrush lubricant.