Joined in 2023 
82 
63 About this deal
If you often find yourself confused about the appropriate and satisfactory hub, Ssk Usb Hub is your end point. The ssk usb hub is good for card reader, is best for heat dissipation, it is perfect for an external monitor and has a good design. Ssk 4 in 1 USB c superspeed usb 10gbps hub, all ports in one hand, no matter where you go, when you are on a trip, business conference and travel around the world. Also, this is also best used for wireless mouse/keyboard, more sensitive and more stability due to the usb 3.0 radio frequency interference to the wireless connection. The USB 3.2 specification defines multi-lane operation for new USB 3.2 hosts and devices, allowing for up to two lanes of 10Gbps operation to realize a 20Gbps data transfer rate. While USB hosts and devices were originally designed as single-lane solutions, USB Type-C ®cables were designed from the outset to support multi-lane operation to ensure a path for scalable performance. Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD.
Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great, fully featured hub that’s still affordable and – most importantly – it just works. USB Type-C has plenty of perks, and with one of the USB Type-C hubs you might be considering getting, you'll be able to copy files at USB 3.1 speeds, deliver enough power to charge a laptop, or use Alt Mode to send other types of data using DisplayPort or Thunderbolt 3connections.Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing. There are still a couple of caveats here. First, your device needs to support a DisplayPort 1.4 video output over USB-C, which will count out many Chromebooks and some MacBooks and Windows laptops. Second, the hub itself takes 15W of power, which means that – even with a 100W USB-PD charger – you may find some laptops not charging at their highest speeds. But if you’re happy to live with these compromises, this is one of the best USB-C hubs we’ve seen. If you're using a USB Type-C cable and port, the charger / host device could support USB Power Delivery (USB PD), which can go as high as 240 watts in some cases. But the wattage has nothing to do with data speeds as a USB 2.0 port could have power delivery while a USB 3.2 port might not. Video Over USB 3.2 / USB 3.1
Ethernet: A wired Ethernet connection is almost always faster than Wi-Fi and is more reliable, too. Most hubs with Ethernet ports support gigabit speeds, meaning data can transfer at up to 1,000 megabits a second. For each model in the test group, we verified the connection speed in Network Utility on a Mac, which displays the maximum link speed. (Note that unless you have reliable Gigabit Ethernet service, you won’t be able to measure if the port is actually performing at full speed.)
What's on Board
You can also get other versions of Inatek's USB hub, the HB2025 for example, that connect to your computer via USB-C, which is a more common interface for 10 Gbps connections, particularly on laptops. We really wish one of these hubs had a mix of USB-C and USB Type-A downstream ports, but they are all Type-A downstream. We also connected an Android phone to the ports and recorded how many volts and amps it received. The phone charging test was probably the most realistic as it showed what kind of volts and amps a real device would negotiate with the hub. If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place.
This industrial-grade USB hub can extend your device's single USB port to four USB 3.2 ports and allows you to switch the USB devices between two host computers (e.g. Laptop and Raspberry Pi). Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test. Asides from these great features, it also has multiple OS support for use with a wide range of devices including Mac OS, Linux, Windows 11 / 10 / 8.1 / 8 / 7 / XP, and many more! And with a 2 in 4 out feature, a small size, and mounting support for easy installation, this industrial USB hub has everything you need for a multiple-device project!Finally, and perhaps most importantly, external SSDs and the best hard drives need at least USB 3.2 / 3.1 / 3.0 speeds. The fastest external SSDs or SSD enclosures can operate at USB 3.2 Gen 2 (10 Gbps) or USB 3.2 Gen 2x2 (20 Gbps), though the 10 Gbps speed is far more common and cheaper. The different USB 3.x version numbers exist purely because the number has been iterated with each speed advancement. In 2008, the USB 3.0 standard launched, bringing USB up to 5 Gbps, a huge leap from the 480 Mbps speed of USB 2.0, and for many years that was as fast as USB could go. In fact, even today, the vast majority of USB ports and products don't go beyond 5 Gbps nor do you need them to. Many peripherals don't even need to go beyond USB 2.0. If you have a USB 3.2 Gen 2 port and want to take advantage of its 10 Gbps speed, look for a cable that supports 10 Gbps (it could be USB 3.2 Gen 2 or USB 3.1 Gen 2) and a peripheral that does the same. If you want to get 20 Gbps speeds, all three pieces: the port, the peripheral and the cable, must support that speed. What Can I Do with USB 3.2 or USB 3.1? Speed: Most USB hubs operate at standard USB 3.0 (aka USB 3.2 Gen 1) speeds of 5 Gbps. However, a few can deliver 10 Gbps. There are also some cheapies that are limited to USB 2; avoid those at all costs.
Output ports: Make sure you get enough ports to attach the number of devices you’re likely to need. Most USB hubs have at least 3, more often 4, output ports, but at your desk, you may need a lot more than that. Also, consider whether you are attaching any USB-C devices (most output ports on hubs are Type-A). Industrial grade HUB chip, adopting MTT technology, allows stable and smooth 4x concurrent USB connections Still, for Windows laptops, MacBook, and Chromebook users who only need a couple of reliable ports, this makes it onto our list of best USB-C hubs.I have been using the Sabrent HB-BUP7, the nearly-identical 7-port sibling to the HB-B7C3, as my daily driver for more than a year, and having these buttons is a real game changer. Changing default audio devices in Windows is a royal pain, requiring one to go into the control panel to, for example, make sound come out of your headset instead of your speakers. But with the power switches, I just turn off my USB speaker and turn on the wireless headphone dongle, or vice versa. All MacBooks and many of the best Ultrabooks come with only USB-C ports, and just a couple of them. That’s why there are so many portable USB hubs that connect to a computer via a built-in USB-C cable and then provide a few Type-A ports, along with some extra goodies such as an HDMI out or a card reader. Anker’s PowerExpand 4-in-1 USB-C hub has one whiz-bang feature we haven’t seen anywhere else, and that’s a built-in 256GB SSD.
Great Deal 
New Comment