Joined in 2023 
82 
63 About this deal
The tape on the fence is movable, so it can be calibrated on the fly with fence moves and you’ll notice they thought ahead about that whole fence not touching the blade thing as they even give you some numbers on the other side of zero. The gauge can rotate 90 degrees in both directions and the positive stops are achieved via a saw-tooth design that’s incredibly effective. When the teeth are engaged, there’s zero play and you have nothing but confidence in your setting.
Whether it's your basic 90° cut-off, simple picture frames, or a 20-sided object, the Miter1000SE byINCRA delivers perfect, repeatable accuracy.First time, Every time, Any angle. INCRA Miter Gauge V27 is engineered to provide a high performance, yet low cost upgrade for any tool in need of a better miter gauge such as a Table Saw, Band Saw, Router Table, Disk Sander or Belt Sander. The Miter V27's adjustable miter bar will fit standard square-sided miter slots measuring 3/4" wide, 3/8" deep, and with or without a 15/16" T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.760".Don't let the small size fool you! The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. Eliminates All Drag Between Workpiece and Table Saw, ESPECIALLY for Extra Large Workpieces Superb Crosscut &Mitering Control The Miter V27's compact protractor design works on applications typically not candidates for aftermarket gauges because of the narrow distance between the cutter and miter slot. The Special Edition Miter1000 comes standard with Incra’s finest cross cut fence, the FlipFENCE and FlipSTOP. The unique design of this fence guarantees a perfect stop point for mitered board ends. When in the stop position, both flip arms fully engage the front surface of the fence, thus preventing the board tip from slipping behind the stop.
Assembly took about 15 minutes but most of that time was spent fiddling with the darn stop. This is one of those parts you wish they included pre-assembled. The Kreg Precision Miter Gauge features an aluminum protractor head, aluminum fence, and an aluminum miter bar. That’s a bold choice for a miter bar as I can see it being a potential weak point in the design, especially at a length of 24” (the longest you’ll find on the market). The gauge can rotate 50 degrees in both directions and has a resolution of 1/10 of a degree thanks to a high visibility vernier scale. It has 9 positive stops that are engaged with a brass pin, though this is an unfortunate design choice as the pin is not fixed to the gauge and if you should happen to turn the gauge upside down, the pin falls out. I also noticed a little play at each detent, but you can overcome it by putting a good amount of pressure down on the pin and then tightening the protractor head. Summary: This gauge is an absolute beauty and the materials seem to be of a higher than typical quality. There are seeds of greatness here but there’s a major failure in execution, several missed opportunities, and a couple of regrettable choices. There’s always a chance that I received a bad unit, but I’ve heard from others who have the same issues and many of the problems with this thing are just the way it was designed. Furthermore, my personal experience with their technical service left a lot to be desired. Am I being a little hard on Harvey here? You bet I am. When a company charges 30% more than the nearest competitor, they’ve got something to prove. And judging from the unit I received (and the customer service), Harvey came up short. Final Thoughts Don't let the small size fool you! The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 degrees for cutting eight-sided frames and mouldings.
Perfect for the INCRA V27 and V120 miter gauges and upgrades the Miter 1000 to Miter the 1000SE.The Flip Fence is designed to give you outstanding fence performance and rigidity. Manufactured by INCRA from aircraft-grade aluminium extrusions, this fence profile is designed to coordinate perfectly with the INCRA Flip Shop Stop. Flip Fences can be used with any INCRA Miter Gauge and the Flip Shop Stop. Flip Fences are NOT compatible with the standard Shop Stop. What makes the Incra 1000HD different is that it’s HIGH DEFINITION! If you look at the protractor head you’ll see more teeth than my new puppy Abby. That’s 180 positive stops. Yeah that’s right. A stop for every degree including 90 in both directions. And it has 1/10 of a degree resolution thanks to the vernier cursor.
Great Deal 
New Comment