Birdgo Solar Panel Roof Mesh Fixing Clips - No Drill Installation of Bird Proofing Mesh to Stop Pigeon Bird Access (Nylon, Pack of 10)

Product Information

Our solar panel pigeon proofing wire or weld mesh nylon installation clips are the perfect solution!

These clips are easy to install and effectively deter pigeons from roosting or nesting on your panels. Crafted from durable, weather-resistant materials, they provide long-lasting protection. Installation is simple and non-penetrating, making it fast and easy to install and remove for servicing. Just follow these four steps:This non-penetrating kit is a fast and easy solution to prevent pest birds from gaining access to the underside of solar panels without drilling and voiding any existing manufacturer’s warranty. Systems can be installed around the side of the entire solar panel cluster and can be fixed with ease using solar mesh clips, which are highly recommended as a fast fitting option, or by using perforated pin bases and washes, however, this requires adhesive and time to set, so some installers may find this option not viable. Alternatively, the solar mesh can be installed with hex screws and washers directly into the side skirt. Still, users should be careful not to damage the solar panel or void any manufacturers warranty. the presence of wildlife and debris can cause structural damage. For instance, rodents can chew through the wiring or debris can accumulate moisture, leading to potential corrosion on the roof. Cut the roll into 1.6 M sections (or length of the longest side of a panel), it is much easier to work with shorter lengths.

This innovative system is designed specifically to keep all birds from getting under solar arrays, protecting the roof, wiring, and equipment from damage. For SolarFix clips to work the solar panel must have a minimum 20mm return lip on the underside of the frame. Set the wire mesh screen in place with the fastener rod pointing upward to maintain downward pressure.STEP 3: Slide the speed washer onto the shaft of the clip assembly until snug. Make adjustments to the screen as necessary. Tighten the ratchet washer as required. Cut off any excess wire mesh or weld mesh screen and flush the clip assembly rod with the speed washer.

Keep your property safe from pesky pigeons with our top-of-the-line Pigeon Proofing Wire and Weld Mesh Nylon Clips. Designed for optimal bird control, these high-quality products are essential for safeguarding your premises against bird-related damages. STEP 2: Set the wire mesh screen in place. Make sure the fastener rod comes through the screen at an upward angle as to keep downward pressure on the screen. Our bird control pigeon proofing solar panel wire mesh or weld mesh installation clips are designed to securely attach solar panel pigeon proofing bird control wire mesh to your solar panels, providing a physical barrier that birds and other pests cannot pass through. The solar panel pigeon proofing wire or weld mesh nylon clips are made from high-quality materials and are easy to install, so you can protect your solar panels and roof in no time. Solar panels are being installed on commercial and residential roofs across the UK. These arrays provide perfect harbourage for pigeons, homeowners are desperate for a solution that does not involve piercing or damaging the solar panels with mechanical fixings, hence avoiding warranty issues. Set the clip in place, making sure the fastener rod applies upward pressure on the screen to keep it in position.

Tired of pigeons causing harm to your solar panels? Our Bird Control Solar Panel Clips are the ultimate pigeon proofing solution for your solar panels. The manufacturer recommends using 2 clips on the short edge and 3 clips on the long edge, spaced every 450mm. Always take appropriate safety precautions when working on a roof and on live electrical installations.

Our bird control solar panel pigeon proofing wire or weld mesh nylon clips are also durable and long-lasting. These bird control solar panel pigeon proofing wire or weld mesh nylon installation clips are able to withstand harsh weather conditions and provide reliable protection for your solar panels for years to come. STEP 2: Set the wire mesh screen in place. Make sure the fastener rod comes through the screen at an upward angle as to keep downward pressure on the screenWeld Mesh Nylon Clips: For a secure installation of Pigeon Proofing Wire, our Weld Mesh Nylon Clips offer unmatched reliability. These sturdy clips are designed to firmly fasten the wire to various surfaces, ensuring a tight fit that prevents pigeons from gaining access to unwanted areas.