Osmo Spray Cleaner 500ml

Product Information

Sand wood surfaces carefully. Begin with coarse sandpaper then progress to finer grades– final sanding work for furniture P150-240 (depending on wood species ). For kitchen work tops using absorbent hardwoods like Oak or Beech, final sanding grade P120. For very absorbent woods like Pine, sand to a maximum of P150. Application of top coat of clear Osmo Polyx®-Oil Original can be carried out once the first coat has dried. However, if the first coat was a coloured Osmo finish ( eg Polyx®-Oil Tint or Wood Wax Finish Transparent) wait approx. 24hrs before applying Osmo Polyx®-Oil Original clear top coat.

For dark and extractive-rich woods (e.g. Iroko, Teak, Mahogany, Sapele, Wenge, Merbau, Jatoba, Cedar etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended. Changing the gloss level: With Liquid Wax Cleaner, you can change the gloss level of your flooring and furniture. If it has become duller through the course of years, you can polish the surface with Liquid Wax Cleaner. Alternatively, you can also give a highly glossy floor a less sensitive satin-gloss. For top coating Osmo white colours use white tinted Polyx Oils ( eg: 3040 or 3240) to avoid yellowing. Be cautious when moving heavy objects such as electrical appliances and furniture. Always make sure you lift and never push or drag. If you cannot lift, slide a blanket or carpet under the objects to prevent scratching and gouging. For stain removal, apply directly to the soiled area – for especially tough stains, use a cloth or scotchpad and wipe away loosened dirt.Wood pre-treated with Osmo Wood Protector 4006 may appear a little more dark and colour intensified. Always trial apply Osmo Top Oil 3068 Natural over the Wood Protector 4006 to ensure the final appearance meets with expectations. Some woods are highly porous and require an especially thin application, as a result the drying time can be increased. We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items

Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. RP (Reduced Pressure) Technology: Spray pressure approx. 1,6 – 2,0 bar, Nozzle approx. 1,6 – 1,8mm. Use mats at the outside of entrance doors to prevent unwanted dirt and grit being carried on your boots and shoes. In addition to this, it is no harm using interior door mats for the same purpose, you might even want to consider a built in matwell at your main entrance. Dry clean with the green Dust-Mop from the Osmo Opti-Set on a regular basis to prevent the build up of any dust or lint on the surface of the floor. Damp clean with Osmo Spray-Mop which makes it really easy. The cleaning concentrate (Spray-Fix) effectively removes dirt without wear of treatment.

Download Product Safety Data

Shake very well before use. Failure to mix all ingredients ( and colour) could lead to an increased patchiness. For kitchen worktops, Osmo Wood Protector 4006 is an optional pre-treatment for absorbent wood like: Pine, Birch or Spruce. Osmo Wood Protector 4006 will help to raise the water repellant qualities of the timber prior to applying Osmo Top Oil. Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining. Airless/Airmix: Depending on the operation of the operator/machine, the equipment and the condition of the respective system as well as the type and shape of the workpieces to be treated.