Joined in 2023 
82 
63 About this deal
Control unit built into an EV extension lead, to enable charging start and stop times to be set using a manual timer or Wi-Fi control (with the added bonus of energy monitoring). The 1.5mmsq vs 2.5mmsq flex debate seems to be the most common one with regards to EV leads on on-line forums, and sadly the most uninformed. For lengths of up to 20m, our advice is that the 1.5mmsq flex used in all of our leads is the best option for the following reasons (apologies for getting rather technical!): Type 2 untethered chargers have a type 2 connector fitted to the unit itself, not to a permanently connected cable (left). They are common for both domestic and public chargers. A separate type 2 to type 2 cable, available in a range of lengths, is required to connect the charger to an EV. When choosing a plug in timer don’t forget to consider the following features… Digital or Mechanical
H07RN-F rubber cables do not degrade over time if used up to the full 13A, as this is well within their safe load limit. Plug-in meter , MID certified for sub-billing applications. Readings can be viewed directly from the unit. The onset of charging can be delayed by 1-12 hours from the button being pressed, with the limitation that a time cannot be set to stop charging. Manufactured from cable which is not sufficiently large in diameter (normally 1mmsq or 1.25mmsq) to handle the relatively high sustained 10A current required.
Type 2 - Designed by the German manufacturer Mennekes, the connector has 7 pins. It was adopted as the EU standard for EVs in 2014 and is therefore the most common EV connector in the UK. It enables single and three phase charging at 3.7kW-7.4kW AC. Many electricity providers offer off-peak tariffs, which are often significantly cheaper. Some EVs have a function to set charging times. However, where this is not available, we provide a number of options: The data sheets for 1.5mmsq H07RN-F cable generally state a max current of 15A. If the cable is a sensible length, the manufacturers recommended max current is nowhere near exceeded.
Dedicated final circuit with over-current protection (e.g. you can't use or spur off an existing ring circuit). Type 1 - Designed by the Japanese manufacturer Yazaki, the connector has 5 pins. It was predominantly used on vehicles from Asia, and is mainly found on older EVs within the UK e.g. Vauxhall Ampera, Mitsubishi PHEV. It allows single phase charging at 3.7kW-7.4kW AC. Irrespective of whether an extension lead is used, it is important that you consider how safe the supply may be before plugging in your charger. We are often asked the question of whether an extension should include an RCD and the simple answer is yes if ANY of the following apply:
Similar products
The first thing I like about this plug in timer is how simple it is and how smart it looks. Some countdown timers are best kept hidden away, but this one actually looks good on the wall! And with just three buttons to fiddle with, it’s easy enough for anyone to get the hang of. Most electric vehicles (EVs) are supplied with a portable domestic charger designed to charge the vehicle when access to a charging point is not possible. Rather confusingly it is commonly referred to as a 'granny charger', as it is a lead to use when visiting relatives such as your granny!
Plug in timers are a really handy product to have in the home. They can save you money, deter burglars and ensure you come home to a warm, bright house on cold winter nights. Timer plugs are also ideal for specialised functions such as Christmas lights, greenhouse heaters, grow lamps, fish tank pumps and any other item that needs to be turned on for certain periods of time. In contrast, a tethered charger (right) has a cable permanently connected, with a type 2 connector on the end. A type 2 to type 2 cable cannot be used to extend the length of a tethered charger, as the international standard has a safety mechanism which prevents the charge from commencing if two cables are joined. What is a granny charger? We only use 1.5mmsq cable, which is suitable for sustained high current applications. As the cable itself is rated at 15A, it can easily handle the max 10A load, even over longer lengths.
Heavy Duty Plugs
There are also modes for turning things on or off on specific days, multiple days of the week or your own chosen pattern. What I really like about this plug-in timer is the random mode though. If you’re off on holiday, simply plug in a light and it will turn on and off randomly to confuse any would-be burglars.
Great Deal 
New Comment