Drayton DIGISTAT +3 22083 7 Day PROGRAMMABLE Room Thermostat

Product Information

Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. Our Green Premium eco-mark encompasses a broad range of environmental criteria, meeting and exceeding international regulations and industry standards: Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers? To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open.

When a boost is selected, a timer symbol appears in the bottom right of the display and remains until the next event. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming However this auto-pairing process only lasts 2 minutes (to avoid issues of pairing with the wrong Digistat). If you find that the 2-minute auto-pairing period has expired, please follow the following process: Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners? Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. How do you boost?

The thermostat also features a "holiday mode" that allows users to set a lower temperature while they are away, further improving energy efficiency. The Digistat remembers the last BOOST so if you always use the same parameters just press the O button once. Simple!

This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat).

Digistat+2 RF

When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money.

There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly.With its advanced programming capabilities, the Digistat+3 allows users to set different heating schedules for each day of the week. This can help to optimize energy consumption and reduce heating costs.