Flue Pipe 1000 mm x 4 inch 100 mm Diameter by StoveMaestro Black Stove Pipe for Wood Log Burning Stove

Product Information

The size of the exhaust for a gas water heater depends on the BTU rating of the water heater and the manufacturer’s guidelines. Common sizes include 3 inches and 4 inches in diameter. The appropriate flue size for a water heater depends on the water heater’s BTU output and the manufacturer’s recommendations. Common sizes are 3 inches and 4 inches in diameter. The length of a flue pipe can vary depending on the appliance’s BTU rating, the type of fuel used, and the manufacturer’s guidelines. It is essential to follow their recommendations.

Tees - Used at the rear of an appliance with horizontal outlet and to be used in conjunction with separate stainless steel tee cap that clips on and off for cleaning and inspection purposes. Flue Direct is built on our reputation, excellent delivery times, unbeatable prices and advice service. Please ensure that your goods have arrived before booking your installation service. If you have any queries please feel free to get in touch. A reducer can be used to transition from an 8-inch to a 6-inch stove pipe, but it must be done in accordance with the manufacturer’s guidelines and local building codes.

Vitreous flue pipe specs

A flue pipe can be too large if it exceeds the manufacturer’s recommendations for the appliance’s BTU output and flue height. An oversized flue can cause draft problems and reduce efficiency. Twin wall flues will heat up when in use as they transport the hot stove gases away from the appliance, the outer part of the flue can be over 90o C or 194o F. The temperature of the twin wall flue will vary depending on: Premier Flue is a comprehensive range of Vitreous enamelled flue pipe. Manufactured in accordance with ISO9001-2008 using superior grade low carbonsteel and coated to the highest standard. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished productshave an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gasses meeting with the requirementsof BSEN ISO 28706 - 1:2011.

Credit subject to status and affordability. Terms & Conditions Apply. Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital UK PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. The register can be accessed through www.fca.org.uk The smallest flue pipe size used for residential appliances is typically 2 inches in diameter. However, larger sizes are more common for water heaters and heating appliances. Flue diameter is measured as the inner diameter of the flue pipe, which is the open area where combustion gases pass through.Flue installation should be done by a qualified professional to ensure proper sizing, venting, and compliance with building codes for safety and efficiency. A damper is a device used to control airflow in a flue, chimney, or vent. The flue is the pipe or passage through which the combustion gases are vented. Leaving the flue open overnight is generally safe, especially if there is a fire burning. However, it can lead to heat loss and may not be necessary once the fire has extinguished. In summer, when the appliance is not in use, it is generally recommended to close the flue to prevent heat loss and avoid drafts.

Our Flexible flue liner is available in both 316 grade stainless steel and 904 grade (Lifetime warranty). Both are suitable to reline your chimney for use with a multi fuel stoves and wood burners and are HETAS approved, for further information please refer to the flexible flue liner section.

Painted stove pipe matches stove and decor

An open flue can allow significant heat loss, especially in cold weather. It is recommended to close the flue when the appliance is not in use to prevent heat loss. The size of the flue pipe for a 50-gallon water heater depends on the BTU rating of the water heater and the height of the flue run. Consult the manufacturer’s guidelines for the appropriate flue size. The BTU capacity of a 3-inch flue pipe depends on the material, height, and other factors. It is essential to consult the manufacturer’s specifications to determine its capacity. The maximum distance for direct venting a water heater depends on the manufacturer’s guidelines and local building codes. Typically, it can be up to 40 feet horizontally and 100 feet vertically. The angle of a flue pipe should have a minimum upward slope of 1/4 inch per foot to promote proper venting.