TP-LINK TL-WR802N - wireless router - 802.11b/g/n - desktop(TL-WR802N)

Product Information

Select Schedule in the drop-down list of Enable Auto Reboot and specify the Time when the router reboots and Day which to decide how often it reboots. Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms. What should I do if I cannot find my wireless network or I cannot connect the wireless network ? 03-21-2022 1547422 Deny or allow specific client devices to access my network with access tiem and content restrictions. bit - Enter 26 hexadecimal digits (any combination of 0-9, a-f and A-F. Null key is not permitted) or 13 ASCII characters.

When you build up a server in the local network and want to share it on the internet, Virtual Servers can realize the service and provide it to internet users. At the same time virtual servers can keep the local network safe as other services are still invisible from the internet.

Router Mode

MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you change the default MTU size unless required by your ISP. Follow one of the following three methods to connect your client device to the router’s Wi-Fi network. If the application you need is not listed in the Common Service Port list, please enter the parameters manually. You should verify the open ports the application uses first and enter them in Open Port field. You can input at most 5 groups of ports (or port sections). Every group of ports must be set apart with “,”. For example, 2000-2038, 2050-2051, 2085, 3010-3030. If the service you want to use is not in the Common Service Port list, you can enter the corresponding parameters manually. You should verify the port number that the service needs.

How to configure Access Control on TL-WR802N (standard router and hotspot router mode-new logo) 06-27-2022 33371 How to configure Bandwidth Control on TL-WR802N (standard router and hotspot router mode-new logo) 09-01-2022 41681 Wireless Radio - Indicates whether the wireless radio feature of the router is enabled or disabled.A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade MTU (Bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU size unless required by your ISP. Feature Filter: ทั้งหมด Troubleshooting Configuration Guide User Application Requirement คำถามที่พบบ่อย

For example, due to some port restriction, when playing the online games, you can log in normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ host with all ports opened. MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.Echo Request Interval - The router will detect Access Concentrator online at every interval. The default value is 0. You can input the value between 0 and 120. The value 0 means no detect. Wireless Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. Enable Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules will take effect. If using a cable modem, unplug the Ethernet cable and reboot the modem. Wait until its Online LED is on and stable, then reconnect the Ethernet cable to the modem. Connect on Demand - In this mode, the internet connection can be terminated automatically after a specified inactivity period (Max Idle Time) and be re-established when you attempt to access the internet again. If you want to keep your internet connection active all the time, please enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your internet access disconnects.

Why cannot I access the Internet after successfully connected to the TP-Link router’s wireless network(Windows OS)? 09-06-2019 1552005 Select Allow the stations specified by any enabled entries in the list to access as the filtering rule. To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. Authentication Type - The default setting is Auto, which can select Shared Key or Open System authentication type automatically based on the wireless client’s capability and request.You can add multiple virtual server rules if you want to provide several services in a router. Please note that the Service Port should not be overlapped. Diagnostic is used to test the connectivity between the router and the host or other network devices. If you start NetMeeting as a sponsor, you don’t need to do anything with the router. If you start as a response, please follow the steps below to configure the router: If your ISP provides the DHCP service, please select Dynamic IP, and the router will automatically get IP parameters from your ISP. VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP or L2TP protocols to pass through the router’s firewall.