Genuine Innokin T20 Coils / 5 pack / 1.5 ohm

Product Information

As the T20S runs lower wattage a 12mg nic won’t give ‘as much’ of a hit as a true direct to lung/sub ohm tank. As such I would say if the 6mg nicotine isn’t doing it for you then a 12mg nic will be OK with this and well worth trying out. The Innokin Prism S 1.5 Ohm coil produces the least amount of vapour, capable of being used between 15 - 18W. For increased flavour and a slightly larger amount of vapour, we recommend the 0.8 Ohm or 0.9 Ohm coil. However, the 0.9 Ohm version also has a mesh build, meaning that you'll experience a more intense flavour from your e-liquid thanks to being heated up faster. Whichever version of the coil you choose, we suggest either a 50/50 e-liquid or high PG eliquid. Previous Endura Models have lots of fans who use them to stop smoking and this is a wonderful update to the range. I used the bulgy type drip tip the most – a straight one is also supplied. I didn’t think I would like the bulgy one but I love it! The Battery: Now from a really shallow perspective this isn’t the prettiest device I have used. The Endura T18 is a beauty and the Joyetech Exceed D19 is stunning. This, for me, isn’t.

Hope that helps in the meantime, anything else that comes to mind you want to clarify please ask away. Previous Endura tanks have been praised for their great flavour production – I know people who use the T18 regularly.This is a top fill tank which I prefer. I did find there is little to grip to unscrew the top cap – you often end up removing the mouthpiece instead.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling. This is a definite MTL coil, quite restricted airflow – but it could do with a slightly tighter draw to satisfy a smoker. I think as a starter or intermediate kit is where this excels. A smoker would find this very satisfying and it totally performs in the same tradition as its predecessors the T18 and T20 – being a great starter kit to advise someone to buy. Due to their handy push-fit design, it's easy to change the Prism S coils in your EZ Watt or Endura T20-S Kit. Unscrew the top cap (not the mouthpiece which I did accidentally a few times!) Grip the top cap part of the tank to unscrew.Simple battery charging- connect the small end of the supplied USB cable to the side of the battery and the larger end to a USB outlet port. The light on the button goes out when it is fully charged. In The Hand I have also tried the tank on another mod on its own to see how the tank performs. 0.8 ohm Prism S Coil This is a great size; everything is comfortably placed to fit well into your hand. It has a good balanced feeling too – some devices are very light at the top and the battery is very heavy, which makes them unbalanced and you have to grip them harder – as you usually only hold them where you press the fire button. I used an 80% VG 6mg nicotine E- liquid (I have added additional nicotine to make this 12mg nicotine strength.) As the 0.8Ohm is a sub ohm coil these generally need lower nicotine levels and can handle higher VG liquid. But these particular coils require less wattage running to them to perform so a 6mg/12mg nic strength isn’t too harsh.

The top cap and mouthpiece unscrew easily and the tank is extremely easy to dismantle if you want to wash it out or change the glass. Well so far after around 4-5 hours of me using this there is no drop in performance and the battery indicator light is still green – which means it is still above half charge. Innokin Prism S coils tend to last between 1-2 weeks, though this can vary depending on your e liquid and how frequently you vape. When it's time to change your coil, you will notice a deterioration in the flavour. If your vape tastes burnt, it's definitely time to change the coil! How to Change Your CoilInnokin have brought us some of the best vape pen devices in the past including those with the ‘Endura’ name. There is the Endura T18 and the Endura T20. Do not get confused as the T20-S is very different from the T20 and does not use the same coils. When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

I’m finding the taste from this in particular extremely impressive. Like its predecessor the prism tanks have always been well regarded for their taste and this is still the same for the T20S. Really superior taste to other tanks I have used.

With high VG liquid you should get more vapour production. This is an ok vapour – not massive clouds which I have got from the same liquid in lower resistance coils – but still good enough. The Endura T20-S comprises of a 1500mah battery unit with a Prism T20-S tank. The tank is a top fill. Another tip is to remove the drip tip when installing a coil – this makes sure that the coil is fully inserted into the tank when you secure it. Flavour & Cloud Production I’ll ask Michelle, who used the device and carried out the review, to share her thoughts as she used a 12mg nicotine for the review.