LG UltraGear 32GN600-B - LED-Monitor - QHD - 80 cm (32")

Product Information

So TLDR, the LG 32GN600-B is a flat 1440p VA 165 Hertz panel, having excellent low input lag, and 1 millisecond response with 5 Gray to Gray. The SDR colors are outstanding out of the box, and perfect after calibration. Supporting FreeSync Premium and working with G-Sync over DisplayPort only, the menu is snappy, and the 8 mm pixel to air is pretty good. For gaming, the Response Time or Overdrive setting of Faster does best at 165Hz, and Normal does best at 60 Hertz. The results of this response time behavior though is that above about 120Hz, the G2G response times start to get a bit too slow to keep up with the frame rate demands and you start to see some additional smearing added to the moving images, especially in darker shades. At 120Hz, 83% of the measured transitions were within the refresh rate window, i.e. they were fast enough to keep up with 120 frames per second being sent to the screen. This was a good result. However, at 165Hz only 43% of the transitions were within this window (165 frames per second now) which leads to a bit of added smearing in practice.

The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC. Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.We have also included some measurements using our recently updated ‘gamma corrected’ response time method, which provides measurements that are even more closely representative of perceived motion performance. These were taken at 120Hz refresh rate and in the ‘Faster’ response time mode. As we discussed earlier it is arguable that the screen looks sharper and clearer at 120Hz thanks to the better response times and better refresh rate compliance, avoiding the added smearing you get at 165Hz because the response times can’t quite keep up with the frame rate. This is probably the optimal setting to use for gaming.

For office work the pixel pitch and font size is identical to a 24” 1080p resolution display which is comfortable and easy to use, without being to large that it loses clarity. It might not look quite as sharp as a 27” 1440p display, but it’s perfectly usable and many people may even prefer it. Movies and HDR Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio. This 31.5 inch 165 hertz edge lit VA panel has a matte non-reflective surface with a 1 millisecond response time, 5 gray to gray, HDR10 handling (ha!) and 10 bit color, which is likely 8-bit plus FRC as LG would likely advertise this as a native 10 bit panel if it was. Contrast is over 3200 to 1 versus the listed 3000 to 1, and the max power draw is 63 watts. Note that we turned ‘Smart Energy Saving’ mode off in the OSD before these tests so that brightness and measurements were not impacted. Everything else was at factory defaults to evaluate the out of the box performance.This is kinda like getting to drive a sports car, you’re all excited about trying it out, you open the door and have to sit on a milk crate and that’s your experience. We re-calibrated on PS4 three times, getting the same result each time. Usually with HDR, there’s that “ooooh” when it looks good, but HDR has really poor color volume here from the incomplete DCI-P3 and Rec. 2020 color gamuts. So, don’t buy this for HDR. Often even a higher peak luminance can be achieved under certain conditions. For example, when a smaller area/APL of the display is used for showing a bright object, when a bright object is displayed for a short time, etc.

The operating temperature shows the safe temperature range (from minimum to maximum), within which the display will function flawlessly. Outside this range it might operate improperly and/or fail entirely. At the maximum refresh rate of the screen we will also include our familiar more detailed response time measurements, which includes a wider range of transition measurements as well as some analysis of things like the refresh rate compliance. This identifies how many of the measured pixel transitions were fast enough to keep up with the frame rate of the screen. Ideally you’d want pixel response times to be consistently and reliably shorter than this refresh rate cycle, otherwise if they are slower it can lead to additional smearing and blurring on moving content. Au final, je dirais que la 2K 32 pouces, c'est vraiment le pied. Que ce soit en jeu, en bureautique ou en vidéo. Par contre je me demande si je n'aurais pas préféré sacrifier la fréquence d'image pour du vrai HDR, étant donné que ce qu'on gagne en fluidité, on le perd en netteté de mouvement (voir vidéo). vu la taille, si vous aimez être près de l'écran, c'est un peu gênant qu'il soit plat. Les bords de l'écran sont un peu "décalés".

The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively. Gamut coverage – we provide measurements of the screens colour gamut relative to various reference spaces including sRGB, DCI-P3, Adobe RGB and Rec.2020. Coverage is shown in absolute numbers as well as relative, which helps identify where the coverage extends beyond a given reference space. A CIE-1976 chromaticity diagram (which provides improved accuracy compared with older CIE-1931 methods) is included which provides a visual representation of the monitors colour gamut as compared with sRGB, and if appropriate also relative to a wide gamut reference space such as DCI-P3.