Beadalon Spin-N-Bead Bead Loader Natural

Product Information

Personally, I have found the little plastic spinners don’t spin very smoothly. So, this is really unhelpful when you are trying to get a flow of beads going. Threads and Cords – We recommend looking at Miyuki and KO Thread or FireLine as the best quality threads for loom work. Alternatively for stretchy loom projects, Miyuki Dura-Line or Opelon are the best seed-beaders elastics.

There is one bowl, which is hard to remove. It’s roughly the same width as a standard wooden bead spinner bowl, but a little tiny bit deeper. Between the bowl and the base is a cylindrical roller bearing, which is loose. That’s not a manufacturing defect, but part of the design. If you do remove the bowl, the bearing will fall off, and you have to position it just right when putting the bowl on. I’m not sure I see the point in the bearing at all since the bowl attaches directly to the motor shaft. I haven’t tried it without the bearing, but I suspect it would work just fine – like all the other models with plastic bowls that attach directly to motor shafts. First and foremost, bead spinners make the process of stringing beads incredibly efficient. Gone are the days of painstakingly threading each bead one by one. With a bead spinner, you can effortlessly load multiple beads onto the needle at once by simply spinning the bowl. This not only saves you an immense amount of time but also reduces hand fatigue and frustration. Using a bead spinner is a must-have skill for any jewelry maker, whether they're a professional or just starting. With a bead spinner, you can easily and swiftly apply beads to threads or cords, elevate your beadwork to a new level. Smaller bowls are better if you have a small project and not enough beads to reach halfway up a large bowl. You can also consider the size of your beads. In the rest of this post, I am going to focus on how to use a bead spinner for French beading. But remember, you can also use this clever gadget for a stringing project, or possibly for string beads prior to bead crochet. You may also know of other crafts where this gadget would be helpful.Start spinning: Give the spinner some spins to start wrapping the beads onto the string. After the initial spin, you can start spinning faster if you like. Bead spinners can be a game-changer for jewelry makers and bead enthusiasts. They can streamline beadwork and speed up the creation of jewelry pieces. Here are some practical uses of a bead spinner: Choose the right size of beads: Bead spinners are available in different sizes. Therefore, ensure that you select a suitable size of beads that can fit in your bead spinner.

I talked to few people and finally decided to try it. So, did it work? Was it worth the investment? Wood is the traditional and most popular material for bead spinners. Today, there are metallic (rare) and even plastic models. Experimentation: Bead spinners are easy to customize and experiment with. You can use different beads' types and sizes, funnels and other supports to make unique works of art more easily. This one fooled me, and I’m a little upset by it. I thought it was a wooden bead spinner, and the listing didn’t say otherwise. But it’s just plastic made to look like wood. Pfft. If I’d known ahead of time that it was plastic, it probably wouldn’t have bothered me. But because I was expecting wood, it was a letdown.

How to use a Bead Spinner

Using a bead spinner for the first time might seem intimidating. However, with a little practice, it can save a lot of time and effort, making your beadwork easier. Here is a step-by-step guide to using a bead spinner effectively: A bead spinner is just about the best tool to ever happen to anyone who frequently strings tons of beads by hand. If you are into French beading or any other bead weaving, knitting, or embroidery technique, you’ll be elated to discover one of these.

Avoid Voltage Fluctuations: In areas with unreliable or fluctuating power supplies, battery-powered spinners provide a consistent and stable power source, ensuring that your work is not interrupted by power outages or voltage fluctuations. Use enough beads in your bead spinner. You want to half-fill the bowl. So, when you start spinning, all the beads will fly out to the side, but create a stream that is wide and deep.Wider bowls are typically easier to use than narrow brimmed ones. They provide more room to spin without your hand brushing against the edges and halting the spin. Functionality Load the beads: Remove the top of your bead spinner and pour in the beads. It is better to work with a small number of beads initially to avoid tangling.

Attach the string: Using a long tail of thread, attach the string to the spindle of the bead spinner. Ensure that the thread is no heavier than the beads, or it may not wrap around the beads adequately. Manipulating Beads: Bead spinners allow you to manipulate beads and include them in your designs effortlessly. As a result, you can afford to incorporate more complex patterns and unique beads that were once impossible to work with. The first bead spinner I ever owned was the Darice battery-operated bead spinner, which I got over 10 years ago. For a long time it was the only powered option available and for most people it worked really well. The one I had stopped working after a couple months, but most people who had them have been using theirs for years with no issues. I probably just got a dud. However, the Darice company went out of business in 2020, and their bead spinner was discontinued, leaving a gaping hole in the bead spinner market. I’m pleased to see that the vacuum is starting to fill up with new models of electric and battery-operated bead spinners!Look for a bead spinner made from durable materials like wood or high-quality plastic. A well-constructed spinner will last longer and provide a smoother bead-spinning experience.