APC - AP9640 - UPS Network Management Card 3, Black

Product Information

Navigate to the folder that contains the file. For example, to navigate to the logs folder, type: cd logs Trading In Multiple UPSs: Customers can trade in multiple UPSs for larger UPSs. The VA of the multiple units can be combined, then doubled, to get a maximum VA the customer is eligible to trade up to. Customer cannot trade in UPSs for any single or multiple UPSs of lesser value (VA) than the combined VA of all units traded in. To detect internal problems and recover from unanticipated inputs, the Management Card uses internal, system-wide watchdog mechanisms. When it restarts to recover from an internal problem, a System: Network Interface restarted event is recorded in the event log. Network interface watchdog mechanism After connecting the correct cable, start the terminal emulation program of your choice. Configure port settings appropriately for the device you are attached to (refer to the User Guide for the particular device). Commonly usedport settings are as follows:

APC AP9640 UPS Network Management Card 3 With PowerChute Network Shutdown Compatibility Information Monitor and manage your UPS as one of your network devices over your preferred Enterprise Network Management System by forwarding SNMP traps (events) across SNMP (v1/v2/v3) using the PowerNet MIB. DHCP/BootP andretry optionsare only available in NMC2 AOS 5.0.X. It is no longer an option in AOS versions > 5.0.XNOTE: Tests have shown that even with the network properly configured, the ability to reference devices that support this option is not immediate.In APC tests, it took between 6 and 16 minutes before this functionality worked. However, it worked every time (max wait 16 minutes).Depending on your network setup, your experience may differ. The User field reports whether you logged in through the Administrator or Device Manager account. (The Read Only User account cannot access the command line interface.) If you do not use a BOOTP or DHCP server, see the Network Management Card Installation Manual provided in

Description: View the date and time you retrieved the event log, the status of the UPS, and the status of sensors connected to the NMC. View the most recent device events, and the date and time they occurred. Use the following keys to navigate the event log: In the user interface, recent events on the Home tab; the menus on the UPS tab; and the menus of the Logs tab including the event and data logs, accessible under the Events and Data headings. (The event and data logs display no button for this user to clear the log).All other products will be delivered via the fastest available method (excluding bank holidays and weekends) and generally within 3-5 days, depending on customer location. Description: Configure the shutdown parameters: this enables you to show and configure UPS Shutdown Delay, UPS Return Delay, UPS Low Battery Duration, UPS Sleep Time, and UPS Min Return Runtime. Any Smart-UPS ® model that has an internal expansion slot, or any Symmetra ® UPS except the Symmetra PX 250 or Symmetra PX 500 UPS On the APC SMX1500RM2U is a slot for a APC Network Management Card. After some research I learned it will take either the AP9630, AP9631, AP9640, and AP9641 all of which are hot swap-able. The difference between the AP9630/31 and AP9640/41 is the network speed of the card. The AP9630/31 are only 10/100 speeds, and the AP9640/41 are 10/100/1000 speeds. The AP9631 and AP9641 can hook up temp monitoring and it has some other ports. Following is an example of the screen displayed when you log on to the command line interface at the Network Management Card (NMC). Information and status fields

If using the wizard over the network,please note, the previouslyunconfigured NMC must be on the same subnet as the computer running the wizard. An alternative method to using the wizard via the network methodmay be to use a direct network connection between a computer and the NMC you are trying to configure and running the wizard. Ultimately, your computer and the NMC will be on a peer to peer network which will allow for configuration as well. InfraStruxure Central — Provide enterprise-level power management and management of agents, UPS devices, and environmental monitors.Install maintenance releases off firmware remotely to your NMC or UPS* ensuring ongoing remote management of your UPS. *SMT, SMTL, SMX, SRT, SRTL models* P/N: SMT1000C, SMT1000RM2UC, SMT1500C, SMT1500NC, SMT1500R2-NMC, SMT1500RM1U, SMT1500RM2UC, SMT1500RM2UNC, SMT1500RMI1U, SMT1500RMI2UNC, SMT2200C, SMT2200IC, SMT2200RM2UC, SMT2200RM2UNC, SMT2200RMI2UNC, SMT3000C, SMT3000RM2UC, SMT3000RM2UNC, SMT3000RMI2UNC, SMT750C, SMT750RM2UC, SMT750RM2UNC, SMT750RMI2UNC, SMTL1000RM2UC, SMTL1500RM3UC, SMTL2200RM2UC, SMTL2200RM2UCNC, SMTL3000RM2UC, SMTL3000RM2UCNC, SMTL750RM2UC, SMX1000C, SMX1000US, SMX1500RM2UC, SMX1500RM2UCNC, SMX1500RMNCUS, SMX1500RMUS, SMX2000LV, SMX2000LVNC, SMX2000LVNCUS, SMX2000LVUS, SMX2200HV, SMX2200HVNC, SMX2200R2HVNC, SMX2200RMHV2U, SMX2200RMLVUS, SMX2KR2UNCX145, SMX2KRMLVNCUS, SMX3000HV, SMX3000HVNC, SMX3000HVT, SMX3000HVTUS, SMX3000LV, SMX3000LVNC, SMX3000LVNCUS, SMX3000LVUS, SMX3000RMLVUS, SMX3KRMLVNCUS, SMX750C, SMX750CNC, SMX750INC, SMX750NC, SMX750US, SRT1000RMXLA, SRT1000RMXLA-NC, SRT1000XLA, SRT10KRMXLI, SRT10KRMXLT, SRT10KRMXLT-10KTF, SRT10KRMXLT30, SRT10KRMXLT-5KTF2, SRT10KRMXLT-IEC, SRT10KXLI, SRT10KXLT, SRT10KXLT30, SRT10KXLT-5KTF2, SRT10KXLT-IEC, SRT10KXLTUS, SRT10RMXLIX806, SRT1500RMXLA, SRT1500RMXLA-NC, SRT1500XLA, SRT192BPJ, SRT2200RMXLA, SRT2200RMXLA-NC, SRT2200RMXLAUS, SRT2200RMXLI, SRT2200RMXLI-NC, SRT2200XLA, SRT2200XLI, SRT3000RMXLA, SRT3000RMXLA-NC, SRT3000RMXLI, SRT3000RMXLI-NC, SRT3000RMXLT, SRT3000RMXLT-5KTF, SRT3000RMXLT-NC, SRT3000RMXLW-IEC, SRT3000XLA, SRT3000XLAUS, SRT3000XLI, SRT3000XLT, SRT3000XLT-5KTF, SRT3000XLW-IEC, SRT5KRMXLI, SRT5KRMXLIM, SRT5KRMXLT, SRT5KRMXLT-5KTF, SRT5KRMXLT-IEC, SRT5KRMXLTUS, SRT5KRMXLW-HW, SRT5KXLI, SRT5KXLT, SRT5KXLT-5KTF, SRT5KXLT-IEC, SRT5KXLTUS, SRT6KRMXLI, SRT6KRMXLIM, SRT6KRMXLT, SRT6KRMXLT-5KTF, SRT6KRMXLT-IEC, SRT6KXLI, SRT6KXLT, SRT6KXLT-5KTF, SRT6KXLT-IEC, SRT6KXLTUS, SRT8KRMXLI, SRT8KRMXLT, SRT8KRMXLT30, SRT8KRMXLT-5KTF, SRT8KRMXLT-IEC, SRT8KXLI, SRT8KXLT, SRT8KXLT30, SRT8KXLT-5KTF, SRT8KXLT-IEC, SRT8KXLTUS, SUA500PDR, SUA500PDR-H, SUA500PDRI-H, SURT1000XLI-NC, SURT8000XLJ-SDB03-V