OX Pro Tile Level System Wedge & Spacer - Set with 100 Wedges and 100 1x13mm spacers + Plier

Product Information

Although the wedges can be installed by hand and pliers aren’t necessary, less experienced users may prefer to use pliers.

Tile leveling systems are affordable, but there can be notable differences in price and what is included in a kit. If you’re looking for tile leveling system clips that fit home improvement work, they ‘d be my choice over other similar items.If using a clip-and-wedge system, give the clip a sharp tap with a mallet to break the upper part free before removing the wedge. If the clip breaks unevenly, use a utility knife with a fresh blade to carefully cut away the remainder. No cleanup is required with T-pins. Why Trust Bob Vila

Tile leveling systems are usually quite straightforward, but there are differences based on the ease of use. The clip-and-wedge method uses a crosshead, which is a plastic clip that sits between the tiles. It has a slot for a wedge. After the wedge is inserted into the slot, pressure is applied either by hand or with special pliers. The Topway system offers a convenient solution with its free-spinning design that allows the screw to spin directly down through the anchor without difficulty, revealing the slope of the sloped or flush tile easily to the naked eye. Since this solution is so easy to use and comes with over 100 screws and anchors, it is perfect for any novice or DIYer doing a full remodel.Large-diameter spinner applies pressure evenly; uneven tiles will be seen easily with the naked eye The clip-and-wedge system is faster, but control of pressure isn’t as accurate. Care is needed not to insert the wedge too far. If that happens, the tile will need to be lifted and reset. There’s also a difference when it comes time to remove the clips. Systems that involve wedges are designed to break off below the grout line. This can be done after the adhesive has set. So wedges are fast and, once set, can be left until it’s convenient to remove them.