MICROJIG GR-100GRR-Ripper 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by , Yellow

Product Information

GRR-RIPPER Advanced is compatiable with virtually all table saws, router tables, jointers, and band saws. The result is cleaner, incredibly precise cuts with your hands protected and keeping the wood under control throughout the cut. The main thing I don’t like about the GrrRipper system is that you can’t use your blade guard, which severely impacts dust control. The factory guard was pretty good at grabbing dust, but then I bought a Shark Guard. It grabs nearly 100% of the fine dust, even when cleaning up an edge. And the design of its splitter/knife is a massive safety improvement over the splitter on the factory guard. Inward Pressure: Keeps the material gliding against the fence preventing wood drifting, burning, and binding The GRR-RIPPER acts as a Moving-Blade-Guard™ for total hand protection.
The Adjustable Centre Leg grips the off cut piece and prevents wood burn. The 1/4″ Leg controls the keeper piece. Balance Support stabilises small and narrow workpieces. Fully adjustable to allow for a limitless amount of uses.

by AR from San Antonio on 12\16\2020 Great product, my go-to table saw and router tool. Also GREAT customer service from MICROJIG. Important Notice: Use Micro Jig products to improve your safety when machining, they should complement your machine guards not replace them; for a safe and happy life of woodworking. All relevant health and safety practices should be used which are applicable to your country of residence. The Gripper is a great addition to any workshop that has a table saw, router, jointer - almost any power tool where your hands could get near the cutters. I do a lot of cutting of 'small' pieces on my table saw - to build boxes, small projects, smaller cabinets, cut blanks for pen turning, toys, Christmas ornaments - lots. The Gripper is the _only_ way I would consider doing a lot of cuts as it lets you handle smaller parts, work with the fence close to the blade, and similar situations.The GRR-RIPPER Advanced comes with two additional accessories for extreme versatility and precision in your shop: TheGRR-RIPPER Advanced gives you the three essential forces of control you need when working on a table saw:

Henry Wang started MICROJIG and invented the GRR-RIPPER in his small garage workshop to cut precise small strips and eliminate waste in his projects. Now, the GRR-RIPPER has revolutionized the way we work with wood and available in 20 countries. Still proudly made in the USA. The legs of the GRR-RIPPER2 Go are staggered so any rip cut from 5/16" (8mm) to 2" (50mm) up can be made with the blade passing safely underneath. GRR-RIPPER2 Go comes with the Micro Jig patented Colour Coded Index to help you set your cuts properly. The Adjustable Centre Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminium or even plastic. GRR-RIPPER Handle can be angled and adjusted for your comfort and control.

Products Shown in the Video

GRR-RIPPER Advanced comes with 3 legs featuringpatentedGreen GRR-RIP® non-slip material, built-in balance support, adjustable handle Includesstabilisingplate andadjustablespacer. GRR-RIPPER has over 30 unique uses on the table saw, router table, jointer, and band saws. The powerful hold, extreme accuracy, and versatile adjustability will help you maximise your materials and greatly improve your protection against dangerous accidents. Stabilise your cut with the Built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" standard without readjusting the fence. Forward Pressure: Feeds both the keeper and offcut of your cut with speed and accuracy parallel to the blade and fence Inwardpressure - Keeps the material gliding against the fence preventing wood drifting, burning, and binding

I got two grippers when I bought my Sawstop. I watched many videos and began using them for all my cuts. There were many things I liked about them, especially their ability to make thin strip cutting more straightforward. The other thing that moved me away from the GrrRipper was watching the dvd set “Revelations on Table Saw Set-up and Safety” located here: Adjustable Spacer gives you 54% more gripping surface and 1" of additional cut capacity to take on your biggest projects and wider cuts. The Micro Jig GRR-Ripper? lets you feed both sides of a workpiece parallel through the saw blade and eliminates bare hand feeding. Important Notice:Use Micro Jig products to improve your safety when machining, they should complement your machine guardsnotreplace them; for a safe and happy life of woodworking. All relevant health and safety practices should be used which are applicable to your country of residence.Brands include but not limited to: Delta, Powermatic, Bosch, DeWalt, SkilSaw, SawStop, Kobalt, Rigid, Jet, Grizzly, Makita, Craftsman, etc. The GRR-RIPPER Advanced gives you the three essential forces of control you need when working on a table saw: In short, everyone that touches a table saw should watch those dvds. I do use the GrrRipper now and then, but for an average cut, I’ve found having the riving knife positioned correctly to within a few .001″, and the fence out of parallel by .005″ has made the biggest difference. Patentednon-slip Green GRR-RIP gives superior gripping power - treaded grooves increase traction, even with sawdust. Theadjustable Spacer gives you 54% more gripping area for controlling larger material. Fully adjustable. Use it as a router table guide for bullnose routing and eliminating snipe from your full-profile cuts.

GRR-RIPPER Advanced comes with 3 legs featuring proprietary Green GRR-RIP® non-slip material, built-in balance support, adjustable handle, and includes two additional accessories: Stabilizing Plate, Adjustable Spacer. THE GIVEAWAY IS NOW CLOSED! MicroJig was kind enough to offer up three GRR-Rippers as a random giveaway! All you have to do is leave a meaningful comment on any one of this week’s safety-related posts. The more you comment, the better your chances of winning. But if you just say something silly, that won’t count. Winners will be announced on Friday May 6th. Giveaway is limited to US and CANADA only. Products Shown in the Video Cut with Surgical Precision with the 1/4" Leg and rip down to 1/4" on your Table Saw. With the optional 1/8" Leg, you can cut down to an impressive 1/8" for outstanding detail. The powerful grip gives you unmatched control and holds over a variety of materials such as cherry, maple, walnut, poplar, purple heart, aluminum, plastics, and the list goes on. Save money on scrap and expensive exotic woods.