Broken key extractor set

Product Information

Some extracting tools—such as HPC spiral blade key extractors—use a thin, flexible bar with a spiraled thread on it—similar to a screw. Select an extractor in your set once you have a good gauge of where the missing piece is lodged. Generally, the small hook type is the most common tool to use to search for nudges to hook a missing piece out. However, to use this method, the key piece will need to be close to the edge of the keyway. If it is too far in, you won't be able to reach it. Before you jump to any conclusions, make sure you’re using the correct key and that you’ve inserted it all the way. It may sound trivial, but sometimes the simplest explanations are the correct ones. Apply Lubricant Do not force the blade into the keyway. If it does not fit smoothly, make adjustments to the blade. It must be thin enough to fit in the keyhole and pass alongside the broken key fragment. 4. Super Glue

Whether you’re working in the field or working at your desk, the extractor set selection we have here is ideal for dealing with any broken key or tool. Push it in as far as possible and then bend the tool into the key so that the threads dig into the key.

Don't get caught without a broken key extractor tool

To start, take your knife and poke it into the side of the key—like in the image above. Apply some force to stab the key as much as possible, and be very careful not to slip and annihilate yourself. The metal used for most keys is relatively soft, and typically the tip of a sharp knife will pierce the side of the key well enough to leverage it out. Always test extractor tools first before use: You can test them by gently trying them out on a doorknob to ensure they fit correctly without any difficulties. Once inserted, gently lift the handle of the extractor upward and leverage it against the top of the keyway to help dig the barbs into the key.

There are two ways to use a paperclip to extract a broken key. In my experience, thinner paperclips tend to work better and give you a deeper grip on the key. Paperclips are genuinely a magical tool and work decently well to remove broken keys— as long as the fractured piece isn't too small and it is not too deep within the keyway.

Frequently Asked Questions

For any of the methods below, you'll want to reduce as much friction as possible. While this step isn't necessary, it can help significantly. Extractor tools should be kept safely : This is essential to avoid unnecessary losses or damage due to negligence. Ensure your keys are made using durable metal: The most common types of metal used in making keys are brass, bronze and silver alloys. However, every kind of metal contains its unique characteristics. Bronze is more rigid than brass but less complex than silver. On the other hand, brass has good strength or resistance against wear and tear. For this reason, the ideal material for making keys is silver alloy with appropriate hardness. Another excellent method to remove a broken key is with the help of a drill bit. Note that you can only use this method when the broken bit of the key is accessible from the keyway's entry.

Our 6-piece broken key extractor set is a lightweight, convenient kit — the perfect set for everyday use. Textured grip handles give you control in wet or dry conditions, and quality US craftsmanship guarantees tools you can trust.Do not squeeze too hard on the tweezers. When the tweezers shut after gripping the key fragment, the fragment will be pushed further into the keyway. Each failed attempt to grip the key will make the key more difficult to remove. 2. Broken Key Extractor