Engine ice Hi-performance coolant - tyds008 - engine ice 81081100

Product Information

Before adding coolant your cooling system must be clean and have no chemicals of any kind left in the coolant loop. Non-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. X1 Eco also contains advanced metal corrosion inhibitors specially formulated to protect your water cooling equipment from corrosion and scale build up, prolonging your equipment life and thermal cooling efficiency. In short, yes, it is highly recommended that anytime you change your coolant, you should flush the system. All Engine Ice formulas are known for maintaining stable operating temperatures, crucial for optimizing engine performance and preventing engine damage.

I did like the manual and some threads here stated and drained through the front engine drain bolt and the radiator drain plug until clear water and then blue coolant started flowing. Like I said it's a metering jet for trans lubing the center section of the gear box and nothing coolant related. Reinstall drain plug to proper torque specifications and pour ready to use Engine Ice to top of radiator. Granville has the manufacturing capabilities to provide a variety of high-quality grade vehicle-specific lubricants all meeting the latest technical specifications.Ive personally seen 2 different bikes puking that engine ice coolant on a ride after a hard flogging.

Engine Ice Hi-Performance Coolant is engineered to maintain optimum operating temperature and reduce power loss from excess heat. Viscosity affects the fluidity of coolant, lower viscosity indicates less resistance therefore better flow of coolant. Engine Ice may well prevent boil-over, but as straight water has a higher heat capacity than anything else it'll run cooler on straight water (unless you're boiling over). Hopefully, you never loose your coolant, but this seems to complicate the repair/replacement process.Color maybe used only to say "Hey I make the blue stuff", however mixing normal Flouro Green and Orange Dexcool can lead to a chemical reaction which turns the Glycol into a gel form and thus clogging the cooling system.

I want to have extra fluids laying around but idk what fluid is in already and I don't want to add engine ice if that's not what's in there because if it mixes with any other coolant it's bad I've read. It does have a slightly higher (~5-7 degrees) boil point than the green ethylene glycol coolants, but that's it.Water Wetter isn't going to make a difference unless you are already maxing out your cooling system and your thermostat is fully open.

I suspect you would defeat the advantages of the superior heat transfer ability of waterless coolant if you added water. Come join the discussion about performance, modifications, troubleshooting, classifieds, maintenance, and more! Everyone wants better performance and our racing, riding and driving areas are diminishing because ecologists constantly claim we damage or permanently ruin the surrounding lands. To avoid cross-contamination of incompatible fluids, drain the system, flush your cooling system with a 50/50 distilled water/white vinegar solution or relevant Flush and Clean product, follow up with a distilled water flush, and then refill with the appropriate Engine Ice product. When you are unsure, the best action is to drain and flush the system and replace it with fresh Engine Ice.

Sometimes they are yellow and other times orange, so it’s easy to get them confused if you use color as a predictor. My 2008 manual may have been printed before we had so many coolant options, so maybe I should forgive KTM for making a durable bike. DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. This recommendation is based upon the high-performance characteristics of Engine Ice and is accurate for all types of vehicles. The advantage of the waterless coolants is their ability to transfer heat from the hottest engine Internal hot spots in liquid form.