SYLJ Ultra Heavy Duty Drawer Slides, 1000-2000 MM 3 Folds Full Extension Ball Bearing Locking Rails Glides, 180KG Bearing Capacity, 20.5mm Wide, 76mm High - 1 Pair (Size : 60in(150cm))

Product Information

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. Do you have a particular request, about a drilling plan, a surface treatment, a specific assembly, etc. When choosing your heavy-duty drawer runner, you need to ensure the length of the runner is suitable for your application. Heavy-duty drawer slides are usually between 1/2 inch and 3/4 inch thick, with some specialty models being as thick as 1 inch.

This is necessary because drawer slides are mounted mirrored and the handles must point in the same direction in that situation. Our super-extension drawer slides are available in standard version or with the addition of options: open, closed, open and closed latch system, edge-mounted or flat-mounted. The more this measurement deviates, the higher the loads the slides will experience, and the heavier the movement will be. If required products manufactured from high grade stainless steel can be supplied offering highest levels of corrosion resistance and low magnetic signatures. With the help of our corner mounting brackets, these drawer runners can be mounted at an angle of 90° to the floor or ceiling.

GSF's ability to select and adapt from an unrivalled base product range, and its ability to assist with the design of bespoke and space-saving drawer systems enable us to make a significant contribution to your own product design. In the following YouTube video I show you how to do this; How to remove the lock from BRASOM 200kg drawer runners?

What distinguishes selected Furnica products from others is additional warranty coverage - FurniCore Quality Assurance. Our professional range of drawer slides meet the expectations of various sectors because of their resistance to the heavy loads but also to the environment they will face. Additional product variations can be produced with bespoke closed lengths, extensions, mounting options, surface treatments and stainless ball bearings/cages.

Check carefully in the installation diagram what the different holes on the guides are for, as there is a slightly different arrangement of the mounting holes on the drawer slide part, different on the side board slide. Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business if the goods purchased are faulty, not fit for purpose or don't match the seller's description. All slides in the Fulterer range are available in different finishes (white, grey and black) which can be supplied against MOQ’s. In addition, our full range of Accuride Drawer Runners includes runners with applicability for smaller loads, so if your project involves lower load ratings, take a look at our light and medium-duty drawer runners.

Constructed from 5 cold drawn steel sections this full action ball bearing slide has high precision and excellent level of resistance to shock and vibration when supporting a static load in the closed position. The slide's ball bearings mean that the drawer can move back and forth in a smooth, almost frictionless motion. Sliding Systems are an approved supplier for many prestigious and well-regarded manufacturers both in the United Kingdom and abroad. The balls in a ball guide are well locked in place using shaped profile slides, so that a ball guide can not only absorb forces from above, but also (to a lesser extent) from the side.Together with a range of slides designed using a rigid "I" beam construction our products offer execelent performance under conditions that may exert high direct and tortional loadings as experienced in such applications as pull-out equipment boards and vertical shelves. steel plate, stronger than the home improvement drawer slides, used for refitting cars, large cabinets, large drawers, multimedia equipment, etc. If you apply the standard heavy duty version, the drawer will fall open if it is inclined downwards. If you don't know which size will fit, please measure the length of the drawer without the drawer frame board,And if the length is not even, please choose 1 inch shorter. You can attach the drawer slides tightly against the vertical lips of the aluminum corner lines using the compact fasteners.

They have been tested to be opened and closed more than 100,000 times, ensuring they will provide reliable performance over the long term.This method of manufacture is far superior to other processes where slides are made from rolled or drawn ‘C’ sections which are liable to failure on extreme applications.