3DLAC spray adhesive for perfect adhesion to the 3D printer print bed, 400 ml

Product Information

When making impressions 3-4 should be re-clean the motherboard 3DLac and re-lacquer spray again or liquid vaporizacor. We’ve harnessed innovation and technology to create a one-of-a-kind solution that enhances the quality and precision of your nylon prints. A light 3DLAC mist over the surface is enough to completely hold the first layer of plastic to the base.

Success in 3D printing often relies on having the right tools and knowledge, and this starter pack will provide just that. In our experience, the the first time you use 3DLAC on your build surface apply two light coats (remember to shake the bottle before spraying). We pride ourselves in our commitment to bringing this fantastic technology to thousands of innovative new adopters, all with excellent service along your journey. Its formula provides a strong and durable bond in nylon 3D prints, allowing you to obtain high quality results in your projects.

is equipped with a user-friendly brush applicator, simplifying the precise and controlled application of adhesive onto the 3D printer’s heated bed. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed. Prima, trading since 2014 are one of Europe's largest resellers and distributors of 3D Printers and associated products. PLUS is a high quality anti warping adhesive that you spray to your heated print bed to help your prints stick.

By accepting these services, we are able to show you videos or other media content hosted by external providers. To use this product you only need to press the applicator against the printing surface for a couple of seconds and once the adhesive flows, it spreads a light layer of product over the printing area. The special formula of the 3DLac Stick facilitates the removal of the part but it should be done very carefully nonetheless.This new format has an applicator that facilitates the use of the product and allows to distribute the adhesive in a precise and uniform way over the printing base. Its new formula unscented double locking is perfect for holding and removing the piece once printing is complete. There are many reasons for adhesion problems, also depending on the filament used, and as many solutions, from adjusting the bed and ambient temperatures, choosing certain slicing software settings, or using tapes and special build surfaces to applying sprays (such as 3DLac Spray) or adhesion liquids, such as the 3DLac Stick.

Then, only some water is needed to easily clean your printing surface and your 3D printer is ready for your next printing. One where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. Depending on the materials will be obtained different adhesions, so we advise before printing large parts with certain technical materials are pre-tested.When removing the parts take special care, we recommend waiting until the temperature of the base is below 30 ° C and in case you do not remove the piece, let it cool in the refrigerator and the piece will be released only with a light touch. This facilitates application, allows for control over the amount of adhesive used, and a more precise and even distribution of the product on the printing base. The function of 3DLAC is to provide a firm and durable adhesion of the filament to the base, avoiding the movement of the piece on the first layers and eliminating warping (lifting of the sides).

Depending on the 3D printed material, the effect may vary, which is why it is highly recommended to test the 3DLac Stick with certain materials ( ABS, PP, Nylon or advanced polymers) before 3D printing the final part.If you choose to decline, then we will only use functional and analytical cookies and you will continue to see random advertisements. It is not possible for us to draw any conclusions about you, and any data collected as a result will never be passed on to third parties. Over a clean and dry surface, place the container upside down and gently press the applicator against the hot bed for a few seconds and allow a small portion of the product to flow. After the printing, wait until the heated base is below 30 °C, the adhesion will be lighter and without tools (depending on the characteristics and dimensions of the part) may remove the piece gently and without damage.