Andonstar AD407 3D HDMI Soldering Digital Microscope with 4MP UHD and 7 inch Adjustable LCD Screen USB Electronic Video Microscopes for Phone Repairing, Circuit Board, SMT SMD DIY

Product Information

Similarly, you can use the remote to change the exposure settings without having to dive into the settings menu, and to adjust the digital zoom without using the hardware buttons. It is a useful addition to the microscope, but if you only use the microscope for SMD soldering you will likely not be using the remote much. The ADSM302 on the other hand has a supposedly higher magnification. I say ‘supposedly’ because these claims should typically be taken with a grain of salt. The numbers are usually measured with digital magnification and on a large monitor. So it is more a case of blowing the image up to a large size than that the microscope actually resolves smaller details. An important difference. When using the HDMI output, the screen on the microscope itself still works. So you can use two screens at the same time. This feature was not supported on the ADSM302. On that microscope you could use either the built-in screen, or an external one. Exporting Photos & Videos to the SD Card Despite its flaws, the Andonstar AD407 is still one the best digital microscopes in its price range. Its build quality could be better, but in terms of features and optical qualities it provides good value. And as far as Chinese digital microscopes go, this is one the best options available right now. If the 10 inch screen isn’t enough, you can connect the microscope to an external monitor. That does disable the onboard monitor, though. The microscope offers plenty of space to solder under and has a removable lens and filter so you can add filters or even put on a wide-angle lens.

Andonstar – Make the micro world wonderful

Thanks, Larry. It should be possible to attach a Barlow lens, provided you can find one with the right thread size (30mm). This portrayed camera seems to do a surprisingly good work though. Looks like one could actually use one. So I say kudos for showing that there is hope. There certainly is a use case for such setup. Just go ahead and press these buttons it won’t destroy the microscope; if at any point you are not happy with the settings you can press this reset button and it will again set the default values for you. I think I have pretty much explained everything, now let’s go through some of the very basic Parameters before I connect this digital microscope with a large 42 inches screen.This is crazy, look at the details, the image is quite sharp and now I can easily read the code which is R2X. We will test so many other things, but first let me explain how to use the menu.

Andonstar AD407 1080P HDMI 4MP Digital Microscope Metel Stand

The HDMI output is clear and provides you with more detail than the built-in screen, which has a 1024×600 resolution. Usually the built-in screen is more than sufficient just by itself, however. On the front of the microscope monitor we have got multiple buttons the Power ON/OFF, Mode/Menu, Digital zoom in, Digital zoom out, OK/Start video Record, Picture capture, infrared sensor, and the focus controller. The AD407, being the newer version, has better overall features. It comes with a bigger screen and is more responsive, making SMD soldering significantly easier. Its sensor also provides a higher resolution photos and videos than the one on the ADSM302. I have the same need. 3/4″ baltic birch plywood is a snug fit in the yoke. I am going to cut the horizontal arm through yoke and make an extension of a few inches then drill 2 holes in each half to secure. If you do want to see your work on a larger screen and in a higher resolution, you can use the HDMI output port. There is no setup involved. Plug the included HDMI cable into the microscope and the other end in your monitor, and you are good to go.When it comes to soldering small SMD components, inspecting PCBs or setting stones in jewelry, a digital microscope is a useful tool. It lets you work on solder joints and components that are otherwise hard to see with the naked eye. What you can get】: ①AD407 Microscope host, ②UV filter(has been assembled in front of the lens), ③Metal base plate, ④Metal Column, ⑤Wrench, Metal clips, ⑥HDMI cable, ⑦Switch cable, ⑧Power plug, ⑨Remote control, ⑩Instructions, ⑪24-hour professional after-sales service. Analyzing, locating, and repairing circuits is the basic work of hardware engineers and there will always be all kinds of strange problems. We need to gradually locate and solve the problems one by one to... Ultra-high definition 2160P Video Record, 7-inch IPS screen while supporting HDMI output, microscope screen and HDMI screen can display simultaneously that allows you to see a more microscopic world and free your eyes all the time. These broad statements need defining. Most electronic hobbyists didn’t use microscopes for electronics because they weren’t needed.