Grohe 46914000 46914000-15mm x 3/8‘‘ UK Compression Fittings/Adapter Kitchen and Bathroom Mixer taps, Chrome, Set of 2 Pieces

Product Information

Would be far simpler to get a tap that is British and just goes straight in where my existing flexis start - is there a good British brand? when the tap in in the basin hole,do the ends of the flexible pipes reach the service valves (some bending of the flexible pipes is allowed). New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .

Take the 10mm screw fitting off the new brass adaptor you've bought and screw on the new flexi tap connector. Apologies, I am doing DIY for the first time in my life and took me 4 hours to only unscrew the tap to water connection due to very tight space.Remove the pipe from the isolation valves, fit the tail adaptors (you'll also need two new 15mm olives) - re-use the nuts from the pipes. uk) is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 733878). Grohe, K7 32175000, Single Lever Kitchen Tap in Chrome with StarLight surface protection to prevent scratches. Remove the short section of 15mm copper pipe from the top of the service valve in your photo, cut a new length of 15mm copper (or plastic pipe + pipe insert either end) to suit and fit a new olive to it where it fits into the service valve. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

If the flexis aren't long enough to reach the isolation valves, then cutting the pipes and using the irons is the best option. I have now removed the old tap and try to fit a new one Grohe 'Grohe Bauedge Basin Mixer Tap Chrome'. Unless you're very lucky the new Grohe flexi tap tails won't be the same length as your existing ones so you're probably going to have to do a bit of simple pipe fitting.

We only sell the highest quality products from the leading brands and manufacturers in the industry. Can anyone kindly suggest a decent brand that will just simply screw on to my existing compression fittings? Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. The Grohe inlet flexi tail hose (45484000) is a genuine, brand new Grohe product, covered by a Grohe manufacturer's guarantee. Anyway thats sorted and will use the push fit on both sides which will make for easier fitting as I can attach them to the tails before fitting them and save messing with spanners in a confined space.

FAMILY BUSINESS: A family run business built on trust and loyalty; we are committed to providing you with the best service and attention to detail that the larger companies in the industry simply can’t match!This will either attach to the adaptors (15mm male>3/8") referred to in the second reply to this post or will screw onto a 12mm compression thread (also 3/8") They will not screw onto 10mm compression fittings. If diy is not your favourite weekend activity,consider getting a plumber in (not on a weekend thou). Large appliances and heavy items delivered direct to the room of your choice, NOT left on the kerb side. To expand on my earlier comment, my understanding is that BSP sizes were based on old-fassioned iron pipes. A pair of 3/8" flexi tail pipe adapters designed for use with most popular European monobloc style taps as they often come supplied with non standard 3/8" flexible tails with female threads as opposed to the UK standard 1/2" female threads.