G-Paint 8 Pack - Golf Club Infill Paint - Black - White - Red - Blue - Yellow - Pink - Green - Orange Paint Fill Numbers Letters, Logos onto Existing Golf Club Graphic

Product Information

Use a Q-tip to apply generous amounts of paint-remover to the areas of the golf club where you do not want any old paint. Acetone will work well. Wear latex gloves before using acetone.

Place Acetone in a suitable bowl and allow the golf clubs to soak in the paint remover. It is recommended that clubs soak for at least six hours allowing the acetone to permeate to all the difficult places to reach. When removing excess paint. Wrap a cleaning swab soaked in acetate around a razor blade or any flat straight object. Rapidly wipe the swab over the area. Replace with a cleanly soaked swab if dirty. Repeat these steps until the club surface is completely clean. Do not use Q-tips as they can cause an indentation on the surface of the paint. Apply generous amounts of paint-remover using Q-tip. Acetone will also do the job. Wear latex gloves before using acetone.

available in our online store!

Once you are satisfied that all old paint has been removed, using a degreasing agent and microfibre cloth make certain that all of the acetone and old paint has been removed ensuring that the club is free of any dirt that could affect the paint from adhering to the club. Allow the clubs to dry completely. 2) Apply Primer As with painting the whole club, the same initial prepping must be followed ensuring that all paint is removed from the areas to be painted. Once cleaning is satisfactorily completed and areas to be painted are dry Custom Paint Fill can commence. Use pointed objects like nails or safety pins to get the paint out of narrow or hard-to-reach areas, like letters and edges. Take a metal bowl and pour acetone into it. Wear gloves made of latex as a precaution before you transfer the acetone. Remove the existing paint from the wedges by soaking it in a bowl filled with acetone for a few minutes.

Choosing paint to repaint your golf clubs or to Customize your clubs with paint refill can depend largely on durability and, frequency of having to repaint the clubs plus ease of application. Epoxy-based enamel paint is recommended as the Best Paint for Golf Clubs. Let the existing paint on the putter soak up the acetone. Allow it to sit for a good length of time. To clean up the paint, let the newly painted putter sit for a while to cure. Then dip your Q-tip in acetone and brush it gently on the areas where the paint is to be cleaned.Let the driver head dry before you apply another thin coat of primer. Allow it to dry up completely. Acrylic paints, on the other hand, are not designed to endure the friction that the club is subjected to on the golf course. To ensure that your putter is free of paint, grease, and debris, use a toothbrush dipped in dish washing soap and make sure you clean it. So before you think about replacing your clubs, first examine each club and then separate them in 2 piles.

Place your putter in the metal bowl filled with acetone. Make sure all parts of the putter that you want to be painted are submerged well in the acetone. Paint Remover. Acetone can be used. Make sure that strong latex gloves are worn to protect your hands. Once the paint has been applied to the required area using your preferred method, allow the paint to dry With all three methods it will be necessary to smooth out and remove excess paint and clean up any spillage onto the clubs ensuring that the paint remains only in the area you want to fill. To remove any excess paint, use a razor blade. You can also use a lint-free piece of cloth dipped in nail polish remover to remove the excess paint. Irrespective of what purpose you are using the paint for, there are several steps that have to be followed before applying the paint. Materials RequiredPaint: Choose a paint that can withstand heavy impacts, abrasions, and friction. Golf club heads are meant to undergo a substantial amount of friction and hence choosing a normal paint would not serve the purpose. The process can be repeated 2 or 3 times to create a deep glossy color. Allow the paint to dry and mature for at least 24 hours before using the clubs. It is easy to apply with a small needlepoint applicator providing accurate results. The paint, touch dries within 30 minutes and is fully dry within 6 hours. It is suggested that only one coat is required. If you feel that the color is not intense enough, add 1 or 2 more coats. Use Acetone or paint remover to remove the paint from your golf iron. Wear latex gloves before you use acetone.

Making sure you are wearing latex gloves use a sharp metallic object to scrape the old paint off the club heads. Use a nail to remove paint from the letters, edges and, difficult-to-reach places. The reasons for the painting of golf clubs can be to repair chips on a driver, paint the complete shaft or, Custom paint fill.Dedicate a good amount of time while using sandpaper on your driver head. Good preparation time will pay off in the long run. Once you are sure the primer is dry and cured, make sure you have a smooth even surface with the use of micro-fine sandpaper. Apply a thin, even layer of epoxy-based enamel paint using a spray can or spray gun. Cover the other parts. The club head and the golf club grip may be covered with painter’s tape so that paint does not get on them. Customizing your clubs refers to changing the color of the embossed areas on your club such as names and numbers. This has become an increasingly popular way among golfers to personalize their clubs known as Custom Paint Fill Allow the paint to dry ( 30 TO 40 minutes) Use sandpaper to ensure a smooth, shiny surface, repeat the process at least 4 times.