Joined in 2023 
82 
63 About this deal
Even in the Full Armor state, where an additional frame and other forms of equipment are attached to the backpack shown at the bottom right of the photo, the main unit can be connected to the arm of the display base and lit up. I recommend getting all the pieces ready for those steps up front, instead of trying to assemble, then go back and get more pieces, then figure out where you were in the prior step.
Master Grade gundams are 1/100 scale kits designed and made to higher standards than High Grade (HG) kits but fall under Perfect Grade (PG) kits. This change of methodology, driven in part by the lack of transformation gimmick to work around, is why I contend that the PG Exia is one of - if not the - best PG kit. Remove the armor on the legs and ankle guards, take off the parts surrounded by the yellow line, and re-attach the armor. This beautiful 1/100 scale model of the Gundam Unicorn features a new Led sheet that has both flexibility and strength. Having painted many Unicorn kits over the years there are a few things I look for that delineate a regular build from a top notch one.
As the main frame of the head is clear, the light used in the eyes just spills down through the clear pieces onto the neck area. Using a flexible LED sheet, Bandai is pushing the limitations of articulation and pose-ability while maintaining a lighting gimmick throughout the entire inner frame. Turning on the head, then waiting for a few seconds for the pyscho-frame to light up is an annoyance, albeit a very minor one. In addition, a pin-vise (hand-powered drill) and plastic saw will assist in modification of parts when necessary. Amuro Ray's customized mount from "Char's Counterattack" becomes a Master Grade kit with design overseen by master mecha designer Hajime.
Keep in mind there are two types of clear plastic used in this kit, crystal clear ones and the ones with a frosted appearance.The connector to the shield LED is difficult to disconnect once it is fitted, so be careful not to damage it when disconnecting. Kits rated as skill level 3 are traditional model kits that require all basic modeling skills to complete. There are some parts that are joined by a white exterior, but the whole is composed of a psycho frame and internal parts. is a line of plastic model kits of anime and tokusatsu characters and is part of Bandai’s Figure-rise line. I’d also like to take a bit of time to talk about the evolution of the Unicorn model kits, starting with the infamous Master Grade.
Before assembling, it is necessary to make sure that the LEDs of each part are emitting light properly. The combination of parts on the head was bad, and the green LED was quite easy to leak from the gap. Both of these stem from the core gimmick of the kit, the ability to transform between unicorn mode and destroy mode. The LED sheet is built inside the column, but it has a structure that does not interfere with the movement.To nicely complete a level 2 kit, you will want to have a pair of plastic nippers for cutting parts from the runners, and a fine file, sandpaper or hobby knife for cleaning the gates. It is a kit that realizes the “structure” that has been calculated and the “light emission” expression by the new LED unit. without glue or paint" All Gundam models are characterized by two essential properties: - the pieces are interlocking - and they are molded in color.
Great Deal 
New Comment