276°
Posted 20 hours ago

TEN-HIGH CO2 Glass Laser Tube 40W 700mm Length, 50mm Dia for Laser Engraving and Cutting Machine (UK Stock)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

SPECIAL COATING TECHNOLOGY】- The inside of the discharge tube (imported German Schotter tube)uses the special coating technology. The coating is a reduction catalyst mixed with materials such as rare earth and gold.

The catalyst contained laser tube uses non-tunable cavity and advanced glass to metal-seal technology, ensuring the laser has a service life of 540 days. Barton, Fritz (2014). "Skin Resurfacing". In Charles Thorne (ed.). Grabb and Smith's Plastic Surgery (7ed.). Philadelphia: Lippincott Williams & Wilkins. p.455. ISBN 978-1-4511-0955-9. For practical purposes, there are three methods of resurfacing: mechanical sanding (dermabrasion), chemical burn (chemical peels), and photodynamic treatments (laser ablation or coagulation). If used incorrectly for long periods of time in over-current conditions, the CO 2 Laser tube's negative electrode will change color, and the service life significantly decreased.When testing the light spot on organic glass, please keep the organic glass 300mm away from the window.

On average, it turns out that when the tube is operating at 100% power, the water in it heats up by 2.5 degrees It is equipped with a dust cover design for the laser light outlet, which is suitable for a variety of industrial environments. EFR X Series Laser TubeThis type of B-grade tube will engrave well, but will have little cutting depth and a tendency to cause scorching around the laser cut. How you use the Laser Tube can affect it’s Longevity. If you are buying a new laser cutting and engraving machine, make sure you ask for the make, model number and physical dimensions of the tube supplied with the machine. It is not unusual for machine suppliers to exaggerate the laser power output of a laser tube, promising 50 watts and supplying a 40-watt tube (50 watts is the Max power and 40 Watts is the rated power) for example. I have also heard of instances where a machine was sold as a 100-watt system but actually contained a 60-watt laser tube. Because the excitation energy of molecular vibrational and rotational mode quantum states are low, the photons emitted due to transition between these quantum states have comparatively lower energy, and longer wavelength, than visible and near-infrared light. The 9–12μm wavelength of CO 2 lasers is useful because it falls into an important window for atmospheric transmission (up to 80% atmospheric transmission at this wavelength), and because many natural and synthetic materials have strong characteristic absorption in this range. [3] A CO2 laser’s size and working area can vary a lot, and also has a big impact on price. The Flux Beamo is one of the smallest and cheapest machines, with a working area of just 300x210mm designed for small projects.

Without knowing the brand of the tube, it’s a little difficult to estimate it’s working life. However, I have seen reports that it’s not unusual for Glowforge machines to overheat due to insufficient cooling which can have a detrimental effect on the life of the tube. Basically, as the tube heats up it becomes less efficient. Prompting users to start increasing the power, or slowing down the cutting speed. Meaning the laser is working harder for longer under stressful conditions.Based on my hands-on testing, the xTool P2 is currently the best desktop CO2 laser, and stands above competitors like the Glowforge Pro, OMTech Polar, and Gweike Cloud Pro. One of the main ones is its working area, which is around 100mm smaller than the xTool P2’s. That being said, its working area is still pretty decent for the price, and it does also have a passthrough slot for feeding through longer materials. However, its 5MP camera is also lower quality than the 16MP one used in the xTool P2, and the P2 also has depth sensors for engraving curved surfaces which really is incredible!! Metallic laser tubes use radio frequency, RF, alternating current to excite the gas, making them better at pulsing. Along with their smaller spot size, these laser beams create engravings with fine detailing. Cutting: F6, F8, and F10 CO2 laser tubes are suitable for cutting materials in advertising, exhibition, decoration and other industries. These cost-effective glass laser devices can meet different processing requirements. We also argue this is a fair option in place of the Orion Motor Tech 80w CO2 laser engraver cutter, which is more expensive. The 70 W also has a lot of the same features advertised in the 80 W, like autofocusing and four-way pass-through.

C. K. N. Patel, “Continuous-wave laser action on vibrational–rotational transitions of CO 2”, Phys. Rev. 136 (5A), A1187 (1964); https://doi.org/10.1103/PhysRev.136.A1187 Executing regular maintenance of your laser cutter goes a long way to extending the usable lifespan of your tubes, whether they are glass or metal. The one caveat many manufacturers will mention is to be careful when using hydrochloric acid with glass tubes because it could damage the glass. If your DC tube is really soiled with sediment, carefully flush it repeatedly with a diluted 3% or 5% HCL solution until it’s clean. Remember to also flush the cooling system, which will reduce sediment and residue deposits. Other upgrades include automatic laser focusing, although manual focusing is still streamlined and easy. The Flux Beamo 30 W is listed as an entry-level laser cutter, and it absolutely is in terms of ease-of-use, however, with this price point, we recommend it as an entry-level cutter for small businesses rather than individual use. cutting, welding and cladding metals such as stainless steel, aluminum or copper, applying multi-kilowatt powers

There are also excellent safety features like its ability to pause mid-job when opened, and its flexible exhaust pipe that allows you to direct potentially harmful smoke away from people and the work area. There’s even an upgrade, the BeamAir filtration unit, which filters the smoke and air coming from the machine, so you don’t have to rely on windows or doors to ventilate. Fantarella, D.; Kotlow, L. (2014). "The 9.3μm CO 2 Dental Laser" (PDF). Scientific Review. J Laser Dent. 1 (22): 10–27. DC laser sources are typically contained within a glass laser tube. In the glass tube of the DC laser, there is a mixture of different gases: Nitrogen (by far the highest proportion of the gas mixture), carbon dioxide (as the laser-active medium), helium (to effectively dissipate the heat loss), and oftentimes hydrogen and xenon. By applying a high voltage to the electrodes in the tube, current begins to flow. The electrodes must be designed as feedthroughs through the glass body. These feedthroughs are weak points in the laser, and as temperatures fluctuate, the impermeability of the laser tube is difficult to ensure. This is because metals expand more than glass when the temperature rises. Glass and metal thus exert increasing pressure at higher temperatures due to thermal expansion. The sealing is therefore subject to higher forces and may show a leak during cooling (after many thermal load cycles). Equipped with threaded poles to attach a red laser guidance system (not included) that allows easy mirror alignment. No more taping your mirrors!

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment