About this deal
As with the first router, go to [VPN and Remote Access] – [LAN to LAN] and select the first un-used profile. Link server, Computers and Network Attached Storage directly, with up to 6 Gigabit LAN Ports. . VLANs allow for as many as 8 separate networks, with options for hotspot captive portal.
Connect the Vigor 2865 to Superfast Fibre with the integrated VDSL modem. Use the Ethernet WAN with cable and Ultrafast FTTP load balance multiple connections to boost performance.The DrayTek router operating as the wireless controller can provision up to 20 DrayTek VigorAP access points with Central AP Management profiles, with an option to Auto Provision - auto configuring newly installed VigorAP access points with the Auto Provisioning profile, upon initial connection to the DrayTek Vigor router's network. Central Switch Management The Vigor 2865 manages DrayTek VigorAP access points and VigorSwitch switches connected locally to the router. This enables you to centrally control, manage and administer multiple AP & Switch devices installed around your building/campus from just the one router. Central AP Management This needs to be configured as a Dial-In VPN connection to accept the connection attempt from the Liverpool router. This needs to be configured as a Dial-Out VPN connection to initiate the connection with the London router. The Vigor 3910 is a Multi-WAN VPN Router designed for high performance and capable of handling the requirements of large and complex networks, with applications including Remote Access, Firewalling, Load-Balancing and Failover.
For most Fibre networks in the UK & Ireland, no VLAN tag is required for Internet connecitivity on the Vigor 2927 router. For example with the Openreach Fibre network. If VLAN tags are used by the ISP, they are usually handled automatically by the ISP supplied ONT. The Vigor 2865 is a VDSL and Ethernet WAN router featuring VPN, advanced routing features, firewall, content filtering, bandwidth management and more. Connect the Vigor 2865 to Superfast Fibre with its integrated VDSL modem. Or connect to VirginMedia Cable and Ultrafast FTTP with Ethernet WAN. It has 1 x RJ-11 WAN port for VDSL2/ADSL2+ (including profile 35b Super Vectoring), 1 x GbE WAN/LAN switchable port, 2 x embedded SIM slots supporting LTE Cat 6 (1 SIM online at a time), and 1 x versatile USB port for The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the DrayTek VigorSwitch G1080 8-port switch, for additional network ports. With 5 dedicated LAN ports and one flexible LAN/WAN port, the Vigor 2865 can connect up to 6 devices directly with a single Ethernet WAN configuration, or 5 devices with a dual Ethernet WAN configuration.
Make sure the WAN is enabled and is set to Always On rather than in Failover mode, so that the WAN interface will be utilised. The Source IP can be left as "Any" to open the port to the Internet, or set to specified IP Objects / Groups to limit access to only that Single IP / Range of IPs / Subnet of IPs To connect a DrayTek router to a CityFibre network's ONT, set the Service VLAN to enable and set a tag value of "911". Mesh Root support with DrayTek VigorAP Mesh Nodes* – New! (requires f/w 4.3.0, available in Q2 2021) It’s hard to fault the Vigor2865ax from a technical perspective, and most of our quibbles are really a wishlist of extra features that would inevitably drive up the price. It’s not perfect, but does what it says on the box with little fuss, at an appropriate price. For those businesses who can make use of its unique set of features, the Vigor2865ax is a great choice.