SanDisk Extreme PRO 2TB NVMe SSD (portable NVMe SSD, USB-C, up to 1050 MB/s read and 1050 MB/s write, robust and water-resistant, carabiner hook)]

Product Information

Editor’s Note, August 17, 2023: As recently reported in Ars Technica , a critical mass of users on SanDisk’s forums and Reddit have reported failures of some SanDisk Extreme, Extreme Pro, Extreme V2, and Extreme Pro V2 SSDs, resulting in data loss, as well as the drives becoming unreadable/unmountable. In May, parent company WD released firmware updates for the 4TB SanDisk Extreme, as well as the 4TB, 2TB, and 1TB Extreme Pro models, plus the 4TB Western Digital My Passport, but complaints continue. We are doing our own stress-testing of the sample drives we originally reviewed. As of today, however, we no longer recommend buying any of the aforementioned SSDs, until we are satisfied the issue has been resolved. ( A class-action suit has been levied against WD surrounding issues with these drives.) We have left our original review in place here for reference.]

USB 3.2 Gen 1 (a.k.a. the old USB 3.0), typically good enough a ceiling for older external SSDs with SATA-based silicon, caps read and write speeds for external SSDs at about 550MBps and 500MBps respectively. While you can use the Extreme Pro V2 drive with any of these interfaces, buying it without provision for a Gen 2x2 interface would be like buying a Corvette for runs to the grocery store. The Extreme PRO® SSD works with PCs and Mac™ computers right out of the box and connects with USB Type C and Type A, 3 making it easy to start and keep working in almost any situation. The SanDisk Extreme Pro V2 supports the latest and fastest USB flavor (USB 3.2 Gen 2x2, also called SuperSpeed USB 20Gbps), which offers transfer speeds of up to 2,000MBps for both read and write when connected to a compatible USB-C port. It tested just short of that (1,909MBps read, 1,919MBps write) in our Crystal DiskMark 6.0 sequential read and write testing. Its scores were also a smidge under the speeds we recently saw from the Seagate FireCuda Gaming SSD (1,992MBps read, 1,967MBps write), which supports the same 2x2 interface. (See how we test SSDs.)

Thank you!

You will need to have a compatible host device to make the most out of this Extreme Pro v2. Sadly, we didn’t have anything at hand to test its claimed performance. We suspect that a lot of potential customers will buy the drive and expect read/write speeds of up to 2GBps (as per the numbers on the box).

We tested the Sandisk Extreme Pro 1TB external portable SSD using a Dell Latitude 7490 business laptop which is equipped with a Thunderbolt 3 port. Note that the Extreme pro Portable SSD v2 includes support for hardware encryption via the Sandisk SecureAccess application. Also, that enclosure is made with an older Alpine Ridge TB3 controller, not titan ridge or newer like on some of these portable SSDs. So, its older tech. Ruggedized design with a forged aluminum body to protect the SSD core and dissipate heat. Plus, a durable silicon rubber coating seeks to deliver higher impact resistance with its IP55 rating for water and dust resistance. 1 nofanneeded said:Because all portable SSD are a box with internal off the shelves NVME SSD .. I am 100% sure you will find the same Version of SANDISK Extreme Pro as a stand alone NVME ... Because all portable SSD are a box with internal off the shelves NVME SSD .. I am 100% sure you will find the same Version of SANDISK Extreme Pro as a stand alone NVME ...The Extreme Pro is IP55 water and dust resistant and rated to withstand a two-meter drop, though we feel that is a very conservative rating. At 85 grams, the Extreme Pro has a solid and weighted feel to it. That, along with the smooth rounded silicone-coated edges, conveys an apple-esque quality. Creative professionals know the value of storage space. With capacities of up to 2TB, 5 you’ll have enough room for the files you need to work on or deliver.

The new SanDisk Extreme Pro v2 comes with some changes under the hood, too. A new ASMedia ASM2364 bridge controller communicates with the host at faster speeds because it has twice the PCIe lane count as the ASM2362, which means twice the throughput. Not only does it maintain a speedy 20 Gbps link while connected to a PCIe 3.0 x4 SSD, but it also features link power management to reduce idle power consumption. The controller also supports Trim to keep performance predictable. The Extreme Pro will appeal to a particular niche, one that craves for speed and wants something that is portable and can withstand more than a few bumps. It comes with a five-year warranty and its size and weight will turn it into a favourite storage companion especially with the hardware encryption. seanwebster said:At that point you wouldn't be testing the actual portable SSDs as they are, you would just be testing the performance of the internal SSDs in that one enclosure. Thus, comparing just the underlying storage alone. You can't compare the performance or thermal characteristics of these portable SSDs without using the default enclosures and bridge chips.

Upgrade your game with super-fast SSD performance that lasts.

Our tests show that the Sandisk Extreme Pro V2 performs on par with current USB 3.2 Gen 2 drives and that’s not a surprise. CrystalDiskMark, for example, hit more than 1GBps on sustained read and write speeds using default settings. The competition TB3 is more popular then USB 3.2 2x2 which is impossible to find in notebook and very rare in Desktops. Also you need to tear down the External drives in each review to see which NVME SSD is in there ... it will also help you to determine TBW/IOPS if the external drive does not say just by discovering which NVME SSD they are using inside.